Power Drills

How To Drill Out A Lock | 6 Easy Steps || Alldrillsets.com

June 12, 2021 By Muhibbullah Shiddique

How to drill out a lock? When you fail to use other techniques to open your lock, drilling out a lock is the last resort for you. But the process is more cost-effective than damaging the door. In this type of situation, you have to make a rapid decision and act on that. If you are in this kind of situation or just want to know the method so that you can avoid any problem in the future, this is the right place for you. We will discuss how to drill out a lock without damaging your door.

How To Drill Out A Lock

Before you start drilling, you will need the following instruments in your hand.

Checklist

Check the type of lock you have.
A speed drill with variable speed.
An HSS 1/8-inch drill bit.
Next 1/4-inch HSS drill bit.
Finally, use 1/2 –inch HSS drill bit.

Can I Drill Out A Lock?

There are a few things to consider before drilling out the lock. The first is the most important thing, the type of lock. You have to check the lock type you have. Tumbler locks are easier to drill through, but if it has any additional security devices, be prepared for some tough challenges.

You Should NOT

If your lock comes with anti-drill pins, think again before drilling. These locks can tackle this type of thing, and if you drill through the rotating cam just beyond the last pin, you won’t be able to open the lock at any cost.

Also, if your lock has a hardened steel pin or a ball bearing in the middle pin, these types of locks are too difficult to drill.

Precautions Before You Drill Out A Lock

Pick Up The Lock

You can use raking for picking a lock, especially if you are not sure of the type of lock you are dealing with. If you can’t feel the inner engineering of the lock and you don’t have sufficient knowledge of picking manually, try a pick gun. It will save you some time.

Bump The Lock

You can apply this method to certain types of locks. It is nothing new and was developed back in the ’70s to make it effortless for locksmiths to disassemble locks.

Slip a bump key two-thirds into the lock. Tap with a hammer in the correct spot on the key, and then the lock chamber should pop out. If you can not work out after 20 or so tries, it probably won’t, no matter how many attempts you make.

Bring a Replacement Lock

Make sure you have a replacement lock to slot in when you drill the lock.

Get The Owner’s Permission

When you drill through a lock, you will destroy it. So getting the owner’s consent is vital. Also, make them understand that you have tried every other necessary means to open that.

What Will You Need To Drill Out A Lock

You won’t need precision tools, but it does require a well-maintained drill and drill bit with multiple sizes.

A drill with various speed settings.
HSS drill bits. Start with a 1/8 inch bit for the initial hole and a 1/4 inch to step it up.
A hole punch for helping the bit to get some guidance when you start drilling.
A hammer for striking the hole punch.
A Screwdriver (flat-headed) that fits the key slot of the lock.
A plastic sheet for collecting the filings.

How to Drill Out A Lock

1. Hammer a Point For Guidance

At the top of the lock, place the punch just below the middle of the outer and inner lock. Sometimes it is called the shear line. This is the exact height you would need to drill into the tumblers.

With a hammer, create 2 or 3 firm taps on the end of the punch until there is a visible indentation.

2. Start Drilling

Now start drilling a hole through the lock cylinder using the 1/8 inch drill bit. This will destroy the pins inside the lock, help you to force it open. Most locks come with five tumbler pins, but there are some with six or more.

Each pin you hit will increases the resistance of the drill. You would feel this ease off as each pin gets drilled through.

3. Apply Steady Pressure

As you drill, don’t rush and apply steady pressure, ensuring that the drill is kept level at all times. Damaging the lock further is the last thing you would want. Set a low setting to the drill for an accurate job.

4. Change The Bit

Once you have drilled the first hole, switch to a ¼-inch bit or any size you think will fit. This will further break up the pins, making sure the lock is easier to open.

5. Insert The Screwdriver

Turn the mechanism using a screwdriver the same way you typically do with the key. When you drill accurately, the lock should turn. If not, you would need to take some destructive action.

6. Destroy The Lock Mechanism

Get 3/4 inch drill bit, and drill through the entire assembly. You could utilize a hole saw or a unique tubular lock bit if you want. That process should open the door.

How To Drill Out a Lock When a Key In It

When you’ve put the lock and can not get it out, drilling is the last thing you can do. It will damage the lock beyond repair if you get it wrong.

1. Choose The Right Drill Bit

Use a 1/4 inch bit and drill into the cylinder to the depth that the key is rest, as you can guess. The cylinder works as the bit of the lock that rotates when you twist the key.

2. Turn The Lock Mechanism

After removing enough debris from the lock cylinder, remove as much metal and any pins you can to so that you can turn the lock mechanism to unlock.

3. Buy a Replacement Cylinder and New Key

After removing the cylinder, please take it to a lock specialist to buy a replacement.

Is it Possible to Drill Out a Master Lock?

Yes, it is possible to drill out a master lock. However, it won’t work on all of them. Use a drill and a 1/4 inch drill bit and drill through the center of the mechanism. That way, it destroys the locking mechanism.

This is different for a tumbler lock because you are aiming for the upper part near where the key slot is.

Here the danger is the drilling won’t open the lock and will disable the lock forever.

Can a Lock Drilling Template Make The Drilling Easier?

A drilling template provides you a guide on where to insert the drill instead of guessing or finding the correct spot by trial and error. They certainly speed up the process and make the task straightforward. They are widely available and vary with various lock styles, so it’s essential to know the type of lock you have.

Tips on Drilling Locks

Use lubricants like water or synthetic oil to ease the passage of the drill bit. It will also help to not getting stuck in the lock.
Always go steady and ensure the drill is in the lowest setting.
Make sure the drill is straight. If you go at an angle, you could damage other parts of the lock.
Don’t blow inside the lock to clear the debris.
Use HSS drill bits. They have the strength to chew through the metal inside the lock.
Use sticky tape across the punch hole to provide the drill purchase when starting.

More Helpful Tips On Tools

Remember, you can not drill out a lock unless you have the perfect tool from an excellent brand.

Makita Power tools

Makita Corporation was founded in 1915. Since then, the company has been manufacturing powerful and efficient products at 10 operating plants operating in 8 countries. Makita tools’ top-class quality and durability are powered by the company’s strong R&D capabilities and have earned the faith of DIYers and professionals worldwide.

Makita manufactures its power tools in plants across the globe, and its main office is in Japan.

The motto of Makita’s manufacturing process is ‘powerful motor.’ Without a good motor, no power tool can perform efficiently. Therefore, Makita leaves no stone unturned to make sure their motors are of the best quality. The company gathers the absolute best raw materials and components for building the most efficient and powerful motors you can imagine.

Makita knows a power tool is like an investment, and the relation between company and buyer is a long-lasting one. Makita respects this relationship and does everything to maintain it at any cost.

You can use Makita drill and HSS bits to drill out a lock with ease.

Makita products

Cordless Tools
Power tools
Petrol Equipment
Cordless tool’s battery
Accessories

Dewalt Drill Driver

Dewalt is one of the leaders in the power tools industry. The company manufactures high-standard cordless and corded drill drivers and many other accessories.

DEWALT offers a full range of cordless and corded drills to meet your every drilling need. Including; stud and joist, 1/2 inch – 3/8 inch variable speed corded drills, and cordless drills in various voltages. Each drill is intelligently designed with features to meet your drilling needs of specific environments and applications.

They have angle drills, standard drills, hammer drills, and other special drills and drivers. For drilling out a lock, Dewalt drill drivers are the best you can get.

Cordless Impact Driver

Like a power drill, an impact driver is also a handheld tool you can use to drive screws. An impact driver has considerably more rotational force than a power drill. An impact driver can create a strong torque capable of driving even large screws and other fasteners into hard materials quickly and easily.

Conclusion

Drill out a lock is not a straightforward task but proper technique and understanding the lock can make the job easier. We hope our tutorial will help you to drill out a lock without any problem. Please use other methods before you drill out a lock, as it will destroy the lock forever. Also, use proper tools from a reputed company to not worsen the situation in the process.

Best of luck with your lock- see you in another tutorial.

How To Drill A Hole In Plastic | 7 Best Effective Ways

June 7, 2021 By Muhibbullah Shiddique

Are you finding the solution for how to drill a hole in plastic? You have to come to the right place. We will provide a brief guide to drill a hole in plastic in this article. Working on plastic can be a daunting task for you if you usually work with brick, wood, or metal materials for your DIY projects. But not anymore. After reading this article, that will be a piece of cake for you.

Drilling a hole in plastic is not a task you should be afraid of. Just follow the following steps:

How To Remove A Drill Bit From The Wall | Alldrillsets.com

How To Drill A Hole In Plastic

Use a flat surface to support the plastic you are going to drill.
Hold the plastic down using clamps.
Use a pen and masking tape to mark the center of the hole
Use an HSS drill that has been used before and therefore slightly dull
Hold your 90 degrees (perpendicular) to the plastic
Set your drill to a medium speed
Let your drill sink through the material without applying much force.
When the drill breaks through, maintain the support with the surface.
Please don’t stop the drill before pulling it out from the workpiece.

If you follow the above steps carefully, you can drill a plastic without breaking it. Let’s discuss those topics in brief:

1. Support the plastic

Plastic sheets are flexible and bend if you don’t support them properly, which adds stress to the surface. And this stress can cause the surface to break when you try to drill a hole through the plastic sheet.

You can use a stiff board underneath to reduce the stress on the surface. You can also cut off an old piece of plywood or scrap wood for larger sheets. That will support the plastic sheet and allow you to drill into this as a sacrificial piece and will reduce the chance of breaking the workpiece.

2. Hold The Plastic Down Using Clamps.

Along with supporting the plastic, you should clamp the workpiece down to stop it from moving around when you drill holes through. Ensure to spread the clamping force over the whole workpiece to reduce stress on the surface. And avoid camping the plastic sheet too firmly as this can break the sheet.

3. Use A Pen And Masking Tape To Mark The Center Of The Hole

Most plastic comes with a protective film to prevent any marks or scratches during shipping or storage. You can write on this, but it is better to avoid marking holes centers or cutting lines on the protective film because it can be hard to see and rub off.

Use Pen And Masking Tape Marking The Hole | Alldrillsets.com

It would be best to use a pen and masking tape to mark the center of the holes before drilling through the plastic sheet. Do not scribe or punch as this could break the surface before you even start drilling, and the tape will prevent chipping when you begin to drill the hole.

It’s an excellent idea to use masking tape on both sides of the sheet to prevent chipping when drilling holes into plastic.

4. Use An HSS Drill That Has Been Used Before And Therefore Slightly Dull

You should use a high-speed drill that has been used at least once before.

You need a sharp drill bit, not necessarily to be new. Drilling holes in plastic creates heat and sometimes melts through the material instead of drilling a clean hole; using an ideal drill reduces the heat.

If you use the right speed and feed rate, you can avoid heat building up on the surface. You should set your drill to a medium speed, apply slight pressure, and allow the drill’s weight to push the drill bit into the material without adding too much stress.

The formula below is a good thumb rule for drill settings for plastic.

RPM (Revs per minute) = SFM (Surface feet per minute) X (3.82/Drill Diameter)

The SFM for plastics is: 100rpm – 300rpm

For example, the speed for drilling a 10mm hole through a plastic sheet will be: (3.82/10) x 300 = 115 RPM

Most cordless drills’ torque is between 0-1900 rpm, and set the proper rpm for drilling into plastic requires a bit of finger adjustment on the trigger.

You can use a medium trigger position to start and released the trigger slowly until you get to roughly the right speed.

For your reference, here’s a list of approximate speeds for the market-leading cordless drills:

Dewalt 0-1750rpm
Milwaukee 0-1800rpm
Bosch 0-1800rpm
Hikoki 0-1400rpm
Festool 0-1500rpm
Metabo 0-1800rpm
Makita 0-1300rpm
Draper 0-1350rpm
Einhell 0-1800rpm
Erbauer 0-1450rpm
Worx 0-1600rpm

5. Hold Your 90 Degrees (Perpendicular) To The Plastic

When drilling the hole through the plastic, you should keep the drill upright or at 90 degrees to the surface and DO NOT move around too much.

Holding the drill steady will help keep the hole straight through the plastic and keep the spot around and correct.

Let the drill do the work, not your force. With the speed set and using an ideal drill bit, the plastic should cut cleanly.

If the cat is not clean, try adjusting the speed of the drill, but do not go too fast, which can raise the surface temperature, and the plastic can melt.

As the drill comes to the bottom of the hole, lessen the pressure to cut through the other side and avoid chipping.

After cutting through the plastic, keep the drilling and gently withdraw from the hole.

6. How To Drill Near The Edge Of A Plastic Sheet?

Like most materials, drilling near an edge is tricky, but this is more challenging with plastic, as the stresses from drilling a hole through the plastic can easily crack the sheet.

You should keep the hole’s edge at least twice the material thickness from the edge of the plastic.

Suppose you are drilling into a 15mm thick sheet, the edge of the hole should be 30mm for any edges of the sheet.

7. How To Drill Deep Holes Into A Plastic

Drilling deep holes need a ‘peck drilling’ technique to allow proper chip clearance and heat dissipation.

Simply put, you have to push into the material and release it step by step, rather than drilling at once.

The drill bit must not travel more than 3 or 4 times the drill diameter before you withdraw to remove the swarf and reduce heat build-up.

Useful Tools To Drill A Hole In Plastic

Now that you know how to drill in plastic, here are some tools to assist you.

GOXAWEE Rotary Tool Kit with MultiPro Keyless Chuck and Flex Shaft

It comes with 3 Jaw Universal Chuck that can apply better stability on your projects, allows you to effortlessly and quickly change accessories on the Rotary machine tool freely. You will get 140 attachments and accessories with the package. You can use this kit on various materials, and drilling on plastic is just a piece of cake.

DEWALT Corded Drill, 8.0-Amp, 3/8-Inch

Dewalt is the most popular brand for drill. The corded drill from Dewalt has8-amp motor that delivers high performance in heavy-duty applications. It has a 3/8-inch all-metal, ratcheting, keyless chuck for more excellent bit retention of the corded drill. The drill has 0-2,500 rpm with a VSR trigger for versatility in drilling and fastening applications. For your plastic drilling operation, this is an excellent choice.

Dewalt Dwa1184 14 piece Set Black Oxide Coated Hss Twist Drill Bit Set.

The DEWALT 14-Piece twist drill bit set comes with Black Oxide coated finish that provides and prevents walking. The Parabolic flute design can improve chip ejection in metal and wood drilling applications. HSS bits are essential for drilling a hole in the plastic, and this set from Dewalt is ideal for that purpose.

Professional Titanium Twist Drill Bit Set

This is a high-strength drill bit set that comes in a non-slip design. The titanium coating ensures long life and is suitable for drilling holes of Stainless plastic, steel, wood that are low hardness. Suppose you are a model worker, then you will love this set. If you have this set in your home, you would not need any other bit to drill a hole in the plastic for a long time.

Conclusion

We hope the article has provided all the information you need to know to drill a hole in the plastic. For efficient work, you can use the tools from our list. Pick the correct drill and the right bit, follow the steps correctly, and you are all set—best of luck with your next project. See you in another tutorial.

How to Use A Drill For Screws | Popular Drill User Guide

June 3, 2021 By Muhibbullah Shiddique

Welcome to the tutorial on ‘how to use a drill for screws.’ If you own a cordless drill, you should be able to do all the stuff you can do with screws. That’s why cordless drills are also called ‘drill drivers.’ If you’ve never used your drill as a screwdriver or have tried but haven’t had much success, read this guide of ours. After finishing the article, you will be able to use your drill as a screw effortlessly.

How to Use A Drill For Screws

The Bit

The type of drill bit you will use will depend on the shape of the head of the screw. The most common one is the star-shaped Phillips head. For this, pick a No. 2 Phillips head driver bit, which is the appropriate size and suits most types of these screws.

Other standard driver bits you can use are the internal hex drive for bugle head batten screws, the square drive bit, which is suitable for decking screws, and the nut setter hex bit, which fits over roofing screws.

The drill bit speed

The Thumb rule is low speed always provides the best control when driving screws. Suppose you are a newcomer or using Phillips head bits screws that don’t lock into the head of a screw. Once you are accustomed to using your drill as a screwdriver, you use a higher speed to get through the job quicker.

Select the right action setting

You will find the action setting for using the drill as a screw on your drill. Turn on the setting, and your drill will be ready to use as a screwdriver. The other settings are to use use the device as a general drill. You would find another setting called ‘hammer mode.’ The hammer mode is for drilling into more rigid surfaces like concrete, brick, etc.

Torque settings

You can adjust the torque settings by changing the collar on the drill with many numbers on it. Torque works as the turning power of the drill, and the torque setting allows you to control how much force you are applying to turn the screw.

When you put the drill at the correct torque setting, that means you don’t overdrive the screw. Test the torque settings of your drill driver and set the right setting to suit the job you’re doing. Typically soft materials need a low torque setting, while for hard material, you would have to set it to a higher number.

Why my driver bit doesn’t stay in the head of the screw!

That is a common thing that happens to many. Especially when you are using Phillips head screws as the head of the bit that doesn’t lock into the screw; if it happens, don’t proceed; STOP immediately.

The bit won’t lock back into the screw, and you would strip the head of the screw and create an even bigger problem.

Use low speed for your drill.

Check whether the head of your bit is in good condition or not. A worn bit should not stay in the head of the screw.

After starting driving, keep pressing on the drill to keep the head of the bit in the screw. Don’t take the pressure off after approaching the material you’re screwing into; keep it on and let the torque setting stop the drill at the right spot.

Don’t try to keep driving a screw if your bit has already slipped. Pull it out and use a new one.

Suggested Tools

Now that you know how to use a drill for screws. But it is better to know which tool is better for your task. Therefore, we prepared the below lists for you.

Best Cordless Impact driver

Dewalt DCF887D2 20V MAX XR Impact Driver

This DCF887D2 has a 1/4″ hex chuck for driving applications. This power tool from Dewalt is powered by a brushless motor which means a more efficient and longer life span.

PORTER-CABLE PCCK647LB Impact Driver

Porter-Cable may not as famous as Dewalt, Milwaukee, or Makita. But, when you are looking for an efficient drill, then the PCCK647LB cordless impact driver is one of the best choices for you. Topclass features and a 3-year warranty are definitely an impact driver you should consider.

Makita XDT131 18V LXT Cordless Impact Driver Kit

This is a lithium-ion battery-powered impact driver. This impact driver from Makita can handle the most challenging screw driving applications, as it comes with a reasonable amount of torque. The drill driver comes with a brushless motor that will provide 50% more runtime than a regular brushed motor and makes the machine more durable.

Dewalt DCF887B 20V MAX XR Impact Driver

The impact driver is straightforward to use. It Weighs only around 2 pounds, and the compact design allows you to work comfortably. You can complete any overhead job and work in tight spaces with lots of ease if you have the DCF887B driver in your hand.

Milwaukee M12 Fuel 1/4 inch Impact Driver Kit

The Milwaukee M12 Fuel has 3 Speed settings, just like the Dewalt DCF887B. These speed settings are 0-1300 RPM, 0-2400 RPM, and 0-3300 RPM. From our perspective, that is an excellent speed for a tool that comes with this length and weight! And you might know the various speed settings that help you to work on multiple projects effortlessly.

BLACK+DECKER BDCI20C Impact Driver Kit

This is an affordable impact driver. You will get a price tag lower than most other affordable impact drivers In the market. However, still, it has the feature and power that many other impact driver does not possess.

DEWALT DCF885C1 Impact Driver Kit

DCF8885C1 is not as compact in design as some other budget impact drivers in the market. But the tool still has the compactness you will want for completing many challenging tasks in tight spaces. The driver is only 5.5 inches long and weighing 2.8 lbs. So, we can say with no doubt that with this drill doing any kind of challenging task is possible effortlessly.

Best Brad-point Drill Bits

Brad-point drill bits are convenient tools, come with a sharp tip and make the drilling work more manageable. Here is our list of best brad point drill bits.

DEWALT DW1720 Brad Point Drill Bit

If a brad point drill bit provides excellent chip removal, you can not but like it. And, this Dewalt DW1720 brad point drill bit set contains that feature with many more advantages.

Steelex D1034 Deluxe Brad Point Bit

If you want to find a brad point bit that can dig a perfectly clean hole and comes with many options, the D1034 might be your option. Moreover, the build quality is really astonishing.

The drill bit set has 25 pieces. Any craftsman or DIYer will like the durable design.

Dewalt Brad Point Wood Drill Bits

The drill bit set has 5 drill bits of different sizes. 4, 5, 6, 8, and 10mm. They have a pivotal location point, and outer cutting spurs for clean and accurate holes. This brad point drill bit set is ideal for drilling hardboard, plywood, chipboard, and all-natural hard and softwood.

Dremel 631 Brad Point Bits

The drill bits set from Dremel have 4 pieces. The high-speed drill bits are suitable for drilling into hardwood. The bits can work with all Dremel rotary tools. Moreover, the titanium-coated brad points stay in the center and begin drilling right from the start.

Fisch FSF-364757 Brad Point Drill Bit Set

The Fisch drill bits are astonishing in design. You won’t see any deviation for Beveled cutting edges, and they produce clean and sharp drilling. This is perfect for you if you are a professional woodworker. Moreover, it will present you with the ultimate cutting speed.

Fisch Brad Point Drill Bits

These brad point drill bits are made in Austria. You can use this bit on any kind of wood, acrylic glass, MDF. And it’s tough to find a drill bit that can deal with soft, hard, and laminated wood at the same time.

Fisch – FSF-134893 FSF-328094 Brad Point Drill Bits

The set has 8 pieces. The set brings a beautiful poly case with it. You can use these Fisch drill bits in soft, exotic, hard, veneered, and laminated wood. Moreover, You will be able to use this bit on MDF and even acrylic glass.

Fulton 12″ Long Brad Point Bit Set

Are you Looking for a drill bit for a deeper hole in plastic, wood, or any other composite materials? Then This brad point drill bit set is ideal for you. You don’t need to line up your drill from the other side and drill correctly again with it. You will be able to drill a 12 inch deep straight hole from these brad pit drill bits.

Bosch Brad Point Drill Bits Set

The German giant Bosch is the world’s leading manufacturer of power tools. Bosch provides excellent accessories for virtually every kind of application. Like their other tools, this brad point drill also bit a superb drill bit.

WoodRiver Brad Point Drill Bit Index Set

Woodcraft is the manufacturer of this drill bit set manufactured by Woodcraft, Amerca’s leading supplier of saws, planes, power tools, hand tools, and many other electronic devices. The full-diameter shank is capable of completing every task efficiently. The carbon still body promises durability, and the shine will remain the same in between drilling tasks.

Best Auger Drill Bits

Auger drill bits are excellent for wood drilling works. They are famous for drilling into bulkheads and general timber applications. Here is our list of the best auger drill bits:

Auger Drill Bit Garden Plant Tool

This is a non-slip hexadecimal drive and can be digging post holes 3.2 inches wide and 11.8 inches deep; you can use these auger bit for many applications like beach umbrella sand holes, bulb planter tools, paint mix, ice fishing, fence hole, and many more.

Eagle Tool US EA75036 Installer Drill Bit

This Eagle Tool auger drill bit is an ideal choice for every type of wood. It comes with a self-feeding and aggressive auger point. So, the bit can drill holes into some of the most challenging wood pieces you can have. It comes with three-flat non-slip grips on the chuck end and a flexible spring steel shank.

IRWIN Weldtec Ship Auger Bit

This auger drill bit for Irwin can dig deeper holes and last a long time. It has a praiseworthy sharpness, and you can tackle any kind of wood quickly. The long length is perfect for all sorts of woodworking projects.

SuperThinker Auger Drill Bit for Planting

It is ideal for planting tulips, bulbs, iris, and bedding plants. Moreover, it is ideal for tilling the soil, digging weeds, mixing seed, soil, fertilizer, batches of mortar mix for hardscaping or paint. The heavy-duty high-speed auger drill bit from Super thinker is built to last.

Makita D-35900 Ship Auger Bit

Makita is a prominent brand for drilling machines. Like their drilling machine, this auger drill bit also provides high-quality. It has a sharp and robust cutting edge that can pierce through any solid wood effortlessly.

You can bore a 16-inch hole even in the toughest tree log. Moreover, the auger drill comes with a nice reusable tube to protect it when I put it away.

DEWALT DW1687 Ship Auger Drill Bit

The self-feed spur of this auger drill bit is well designed and can penetrate really fast. The dual cutting edge of DEWALT drill bits is built for the highest durability in nails. Digging a 17 inc hole in a solid wood log is straightforward when using the Dewalt DW1867 auger drill bit in your hand.

Woodrow 09709 Ultra Smooth Auger Bit

The lightweight of this auger bit can confuse you at first, but you will change your mind when you start working with it. It can dig perfectly clean holes. Besides, it comes with two cutting wings and provides excellent chip ejection.

Conclusion

If you were looking for how to use a drill for screws, this article has helped you to do so. If you want to add some more weapons to your arsenal for your DIY projects, our list of helpful tools will also help you. Best of luck with your next project, and see you in another tutorial.

What Is A Hammer Drill And How It Works | Best User Guide

May 27, 2021 By Muhibbullah Shiddique

Suppose you have entered a power tool shop for the first time to purchase a drill. You might get confused seeing a couple of options though they look almost the same. You will find a regular drill and hammer drill or hammer drill driver, to be precise. So, what is the difference? Here we will discuss what is a hammer drill and how it works. After reading the article, you should have a clear understanding of the hammer drill and therefore can decide whether you need it or not.

What Is A Hammer Drill And How It Works:

What Is A Hammer Drill?

Hammer drill is just like the regular drills with some additional features. Hammer drills come with an additional pushing mechanism. Hammer drills can push forward drive drill bits with a pulsing hammer-like action as they rotate. This hammering mechanism is essential for projects that include drilling into brick, concrete, block, or any other masonry surface.

Why Use A Hammer Drill?

Regular drill bits are not sufficient for working into hard materials like concrete, brick, rocks, and any other hard surfaces. You can use them for light purposes, not for the more challenging surface.

That’s why hammer drills you will need hammer drills. Average drill drivers use a rotary motion for drilling applications that rotates the bit in the chuck. Hammer drills, on the contrary, have come with a percussive force that acts like a hammer hitting a nail.

As the drill bit rotates, the hammer drill creates a forward motion to drive the bit into the hole.

How Does Hammer Drill Work?

What is a hammer drill and how it works, in this article you already know what is a hammer drill? Now the point is how it works. Let’s discuss. Hammer drill comes with two discs that have ridges, just like the poker chips. When the discs slide past the other, it rises and falls. As a result, the chuck slams forward and goes back. In the best hammer drills, that action can happen more than 30,000 times per minute!

How Hammer Drills Works | Alldrillsets.com

A clutch separates both discs when there is no force on the chuck, and the pounding action stops.

Most hammer drills come with a switch to the on/off the hammer mode feature. When you are in hammer mode, the hammering begins. You can use your hammer drill as a regular drill by turning off the hammer drill feature.

This saves wear and tear. Many hammer drills can be used as regular drills by switching off the hammering action.

How are Hammer Drills Physically Different From Regular Drills?

Regular Drill And Hammer Drill | Alldrillsets.com

The manufacturing process of a hammer drill is almost the same as regular drills. In a hammer drill, manufacturers start with a standard drill and add a hammer mechanism behind the chuck. Typically, this mechanism adds a small amount to the overall length and a few ounces to the overall weight. It would be tough for you to tell the difference looking at the two side-by-side.

Modern drills and hammer drills both come with clutch settings and drill settings. When you look at a hammer drill, you will find an additional hammer mode you can switch into.

Some models come with different colors for mode changes and the clutch collar, whereas others keep them all on one collar. You will find the hammer mode always right next to the drill mode.

When Should You Use a Hammer Drill?

Hammer drills often come with a selection switch that allows users to choose between hammer and regular modes. If the project you are performing requires drilling into brick, concrete, or another masonry, you should turn on the hammer mode and use it.

Professionals and contractors regularly use hammer drills to install electrical boxes and other fixtures to brick and block walls. Homeowners and DIYers also use hammer drills for numerous projects, with the most common being installing shelves and cabinets on masonry.

What About Hammer Drill Bits?

Hammer drills are ideal for light masonry. It works best at drilling holes in the mortar, brick, and concrete blocks. But it can also tackle the occasional hole in poured concrete.

You don’t need to invest more money in hammer drill bits. Expensive hammer drill bits usually come with superior carbide tips, which are more securely attached to the shank of the bits, and they don’t get damaged in heavy use.

Which Hammer Drill Should I Buy – Corded Or Cordless?

Let us answer the question with another question, how much mobility and power do you need? A cordless power drill provides you the freedom to roam, No need to plug in to get the ability.

Cordless hammer drills are ideal for a construction area because they give you the freedom to work anywhere you need. You can speed your task with that mobility. One thing to consider, though, cordless hammer drills produce less torque compared to the corded counterparts, so most professionals use them when the job doesn’t need that much power.

You feel tense when you are using a cordless hammer drill because you can lose energy anytime. When the battery loses most of its power, the drill becomes slow, creating problems in the middle of the work. That’s not something you should not worry about while using a corded hammer drill.

Now come to corded hammer drills. These hammer drills won’t let you go places with it. If you need to work far from the plug socket, you’ll need a long extension cable. These extension cables can create multiple problems, especially if you are dealing with an area with other tradespeople around you.

Apart from that problem, corded drills will slow you down. But, if you are not worried about the cord setup and don’t want to sacrifice the torque, then corded hammer drills are your best bet.

You will not lose power with a corded hammer drill, so you will be able to work for a more extended period of time.

9 Best Cordless Hammer Drills Reviews

We know the best cordless drill is the same for every user; it depends on the user’s requirement. Every user has different needs, and DIYers and contractors will demand various cordless hammer drills as the projects won’t be the same for everyone. Here is our list of the 9 best cordless hammer drills.

DEWALT (DCH273B) 20V Cordless Rotary Hammer Drill

The DEWALT DCH273B cordless rotary hammer drill is one of the most potent tools by the company. We love the active vibration control and optimized ergonomic design of this drill. Both features deliver ultimate user comfort and increased performance.

The brushless motor increases the lifespan and the running speed of the machine.

Milwaukee 2804-20 M18 FUEL 1/2 in. Hammer Drill

This Milwaukee 2804-20 18 V cordless hammer drill is one of the best for heavy-duty applications.

A mighty brushless motor powers this hammer drill. It can deliver up to 60% more power. It has a 1.5-inch length and delivers up to 2 times faster speed under heavy load. The motor generates 1200 in-lbs of torque and 2000 RPMs. It also provides fast drilling in multiple applications.

Makita XPH07Z 18V Lithium-Ion Battery 1/2″ Hammer Driver-Drill

Are you looking for power? The Makita XPH07Z can be the tool you are looking for. This device is by far the best powerful cordless hammer drill on the market. And this mega-powerful hammer drill comes at a very affordable price.

It is powered by a brushless motor that increases the drill driver’s life span by 50% more than non-brushed.

Dewalt 20V Max Brushless D-Handle Rotary Hammer DCH133B

This compact drill comes with a rotary mode and a hammer + drill mode. A brushless motor runs the drill, therefore, delivers extended runtime and durability. Brushless hammer drills are more potent as they don’t have a voltage drop or friction for energy loss.

The 20V Max brushless rotary hammer, DCH133, delivers 2.6 joules of impact energy and comes with a 1″ drilling capability. The highest drilling range of this cordless drill is 3/16″ to 5/8″.

Milwaukee 2712-20 Cordless Rotary Hammer, SDS Plus

Milwaukee is the market leader in the power tools industry, and thousands of people use their cordless drills with utmost satisfaction.

The Milwaukee 2712-20 Cordless Rotary Hammer is powered by 18V lithium-ion batteries. This is a solid cordless hammer drill that is capable of drilling through tough masonry effortlessly. And, of course, it is powered by a brushless motor.

DeWALT DCD996B 20V XR Hammer Drill

Looking for the best hammer drill for home projects? This model from Dewalt is built for that purpose.

Not only is the Dewalt DCD996B able to tackle the drilling and fastening applications. It has a LED work light setup in the front to provide you light to your working area. When you are working in a low-light situation, you will need additional light to enhance visibility. Moreover, it has a brushless motor that provides an extended life span to the drill driver.

PORTER-CABLE 20V MAX Hammer Drill, Tool Only (PCC620LB)

This is another excellent choice for homeowners and DIYers. But we assume this unit from Porter-Cable is also a convenient and valuable tool for professionals.

This drill has 283 MWO, which is less potent than some other models on this list, but it’s still powerful enough to drill and fasten in masonry.

CRAFTSMAN V20 Cordless Hammer Drill Kit (CMCD711C2)

Are you looking for a budget cordless hammer drill that can handle most projects around your house? Then the Craftsman V20 Cordless Hammer Drill is for you.

This Brushless Hammer Drill delivers a legitimate Pro-level 2100 RPM no-load speed and is perfect for multiple drilling and fastening needs.

RYOBI P1812 ONE+ HAMMER DRILL KIT

RYOBI P1812 18v cordless hammer drill can generate up to 750-inch pounds of torque with the 24 position clutch. You can drill through various materials, from wood to masonry to plastic, with the 3-position speed adjustment knob.

Near the base of this hammer drill, you will find a platform where you can put your bits and fasteners. This way, you will be able to change bits without walking away from your job to your toolbag for different jobs.

7 Best Corded Hammer Drills Reviews

Corded hammer drills use a direct cable connection to operate, and therefore, they deliver more power than cordless hammer drills. If you perform heavy-duty drilling applications more often, a corded hammer drill could be your best companion. Here is the list of the 7 best-corded hammer drills from us:

Dewalt D25263K D-Handle Rotary Hammer

This D-Handle SDS Rotary Hammer from Dewalt is an innovative tool and offers 3 Joules of impact energy for faster drilling jobs. The corded drill has an 8.5 Amp high-performance motor to meet all of your requirements.

The drill has an interesting feature called shock active vibration control, which reduces handling vibrations.

Bosch 11255VSR Bulldog Xtreme

This is another powerful SDS rotary hammer drill, and you will get three typical modes: the hammer, rotation, and chisel. This drill delivers two pounds of impact with each strike, and the SDS chuck will automatically lock the drill bits in place to provide speed and convenience.

If you are searching for a drill for challenging materials like concrete, this drill driver will serve you well.

SKIL HD182002 Corded Hammer Drill

This drill set comes with a 100-piece accessory kit. They are 16 masonry, 10 nut drivers, and 3 spade bits to work on all types of materials.

A 2-level variable speed trigger of this model increases or decreases the pressure and speed of drilling based on the application. This unit works equally fine with crude hole drilling on more solid surfaces or lighter projects such as furniture assembling.

Bosch GBH2-28L Bulldog Xtreme Max Rotary Hammer

You don’t need an introduction for the Bosch bulldog. You surely want this beast at your home. Some other companies are trying to copy it, but none of them are as successful as this one.

This Bosch drill comes with an 8.5 amp motor which makes it very powerful against concrete or masonry. Just like other Bosch Bulldogs, this drill driver has a keyless chuck design, and you can use SDS Plus Bits.

Makita HR2475 1″ Rotary Hammer

When we talk about drills, we can not ignore Makita as it is one of the best in the industry. This hammer drill from Makita comes with a torque-limiting clutch that automatically releases the gears if the bit binds. This feature prevents gear damage.

It also comes with three modes of operation, hammering, hammering with rotation, and rotation only. It has an ergonomically designed “D” shaped handle to provide added comfort and control.

Dewalt DWD210G 1/2 IN. (13 MM.) VSR PISTOL GRIP DRILL

This unit from Dewalt is equipped with a mega 10 amp motor; this corded drill can tackle nearly any task with its enhanced power and high-class performance.

The patented DeWalt high-performance motor is designed to deliver 50% more power than a standard motor of other power tools and has increased overload protection. For this protection, it adds more durability to every drilling application.

VonHaus SDS-Plus 10 Amp Rotary Hammer Drill with Vibration Control, 3 Functions

This rotary hammer drill from VonHaus is ideal for challenging DIY tasks such as detaching plaster, rooting out tiles, removing bricks off a wall, and even digging out old grouting and other household works.

The drill runs on a 10 amp motor, making it perfect for use with materials such as wood, masonry, and metal.

Conclusion

Hope now you got a clear picture of what is a hammer drill and how it works. Hammer drills are a convenient tool for both DIYers and professionals. We hope the article helped you to understand everything about hammer drills. Suppose you are looking to buy one you can choose between cordless and corded. We have tested every product before adding it to the list. So, you can purchase anyone from the list according to your requirement.

Best of luck and see you in another article.

How To Drill Into Concrete With A 12v Drill | 7 Best Effective Steps

April 18, 2021 By Muhibbullah Shiddique

If you want to learn about – How to drill into concrete with heavy drills. This tutorial will provide a step-by-step guide on this subject. 12V cordless drills are very popular among DIY enthusiasts. If you finish the tutorial, you will be able to know how to drill into concrete with your 12V drill effortlessly.

The 12V drills are typically used to drill wood or similar applications. But you can use your 12V drill for more heavy-duty applications like drilling into concrete.

How To Drill Into Concrete With A 12v Drill

Can We Use Our Cordless Drill To Drill Concrete?

Yes, you can. With proper technique and effort, you can use a cordless drill to drill concrete. Cordless drills these days come with a powerful motor and long-lasting batteries. Digging into the concrete using a 12V drill is very much like using a corded drill for the application and demands the same basic drilling technique.

How to Drill Into concrete with a 12V Cordless Drill

You can drill concrete with cordless drills with a good drill bit and drilling technique. Here are the steps of how you can drill into concrete with a 12V cordless drill.

Step – 1: Charge Your Battery

First, charge the battery of your 12-Volt drill using the charger provided by your manufacturer. Remember, drilling into concrete is a heavy-duty job, so you should fully charge your battery before start drilling into concrete with your 12V drill.

Step – 2: Install The Battery

Have you fully charged your battery? Now attach the battery with your 12V drill.

Step-3: Marking

This is an essential step, but many people forget to do that. You don’t want to drill a hole in the wrong place. After drilling a hole, there is no coming back. So, first, mark the area you want to drill the hole. Use a chalk or marker pen to precisely mark the place where you want to drill.

Step – 4: Insert the Masonry Drill Bit

Now, as you have prepared the drill machine, it’s time to install the bit. You will need a masonry bit to drill a hole into concrete. Bring the masonry drill bit and insert the squared end of the bit into the chuck at the end of the drill. It’s a heavy-duty task, so tighten the chuck by holding it with your hand. It would be best if you squeezed the trigger while the drill is switched to the forward position. Ensure that you have attached the correct sized drill bit for the hole you are planning to create.

Step 5: Take Your Position With The Drill

Now you have all the necessary pieces of equipment to drill into concrete with your 12V drill. Make sure you are drilling into the right place. Hold the drill exactly where you want to put the hole. Don’t drill into the wrong location.

Step- 6: Start Drilling

Now use your dominant hand to hold the trigger end of the drill and steady the front of the drill with your other hand. Pull the trigger of your drill and place the drill over the location where you want to create the hole. For getting a straight hole, you should set the drill at a 90-degree angle against the concrete or wall. Help the drill penetrate the concrete with moderate pressure. Don’t push too hard, as it can break the masonry drill bit once you have reached the desired depth; back out the bit while the drill is still running.

Step – 7: Increase The Bit Size

At any point, If you hit the spot in the concrete and can not go further with the bit, it’s time to change the bit. Here you should increase the diameter of your drill bit. Once the hole is slightly bigger, take a hardened nail. Now place the nail in the hole and use a hammer to give some whacks on the nail. Then repeat the process before achieving the perfect hole you are looking for.

You can see this tutorial:

Suggested Tools to Dill into Concrete

You can use a 12V cordless drill to drill into concrete, but you must have the best tool in your hand. We have listed two drills that are highly compatible with drilling into a hole, and you will be able to complete your task effortlessly.

Bosch PS31 2A 12V Cordless Drill Driver Kit for Drilling Into Concrete

This is an excellent tool for homeowners or weekend DIYers who undertake small projects around the house and don’t want to spend a ton of cash. This is a powerful cordless drill machine that can drill into concrete quickly.

The Bosch PS31 drill is a lightweight tool; that’s why any person can use this drill without much effort. A weighty drill would be challenging to work within areas that are above a person, and therefore this feature is handy.

The drill comes With a two-speed setting and 20+ one torque adjustment. This is incredibly easy to handle as well as very versatile. The sleeveless drill chuck of this power tool can accommodate 90 % of typical applications. The torque helps in perfect drilling and screw driving.

For drilling into concrete with a 12V cordless drill, you will need powerful batteries. And nobody can provide you with such batteries as Bosch does. The powerful 2A batteries are perfect for heavy-duty applications such as drilling into concrete.

The drill also comes with a warranty and guarantee, which is a great assurance.

Bosch GSR12V 140FCB22 Flexiclick Drill Driver for Drilling Into Concrete

This is a different kind of toolset that you won’t get in the market so often. It’s a drill that has interchangeable heads. So when you are drilling holes, you can change the drill head as you need. Besides, if you have to get into a tight space, you can detach the head and attach the right angle drill head. Bosch calls the mounting system “One-Click interface.”

The Bosch Flexi click 5 in 1 has four chucks. The set has an easy-to-use twist-lock design that makes them effortless to attach and detach and lock securely in place. Because of these other chucks, Bosch named this model Flexi click. Bosch is providing a total of 4 chucks in addition to the built-in 1/4-inch magnetic hex socket.

The drill performs as you would want from the Bosch 12V system. The drill is smooth, straightforward to feather the trigger, and powerful enough for most projects. Even if you switch to the correct angle drill, you won’t notice a loss of power or ergonomic balance. There isn’t a delay in drilling or driving.

If you want to use this drill driver with the Hex attachment head, you won’t notice it’s a multi-head tool. It feels and performs just like a screw gun.

Even the offset head works smoothly. You won’t feel any loss of power or feel of the tool.

For occasional masonry works like drilling a hole into concrete, this is an ideal drill. Moreover, with the flexible head, you will be able to drill a hole into concrete from any position.

Frequently Asked Questions

Can A 12V Drill Go Through Concrete?

You can drill into concrete with a 12V drill. However, many people say that you cannot drill concrete with a regular drill, but practically you can. Some people believe that you will need a particular hammer drill with hardened drill bits to drill into concrete. Those tools do make the drilling process faster and easy, but that does not mean that you can not drill into concrete with a regular drill.

One crucial caution though you should not use a 12V drill to drill through concrete regularly. Because if you do, so there is a chance that you can damage your machine. It is better to use a heavy-duty drill made for heavy-duty tasks to drill into concrete regularly.

Can You Drill Into Concrete With A Normal Drill?

Regular drill bits are made for drilling into woods or similar surfaces. That’s why many people say that it is not possible to drill into concrete with a regular drill. But you can drill into concrete with a standard hammer drill with a correct drilling technique. You would need a masonry drill bit to drill into the concrete using a standard drill.

However, you can use a regular drill to drill concrete occasionally. Still, we do not recommend you to drill into concrete regularly with a standard drill as it can damage your drill.

Which Drill Is Best For Drilling Concrete?

Though you can drill into concrete with a regular drill, that is not a permanent solution. If you need to drill into concrete regularly you a hammer drill is the best option you have. Just a hammer drill isn’t sufficient, and you will need to equip the drill with the right drill bit also.

Typically, a hammer drill comes with an SDS-plus drill head that’s only ideal for SDS-plus drill bits. That’s because a quick-release drill bit would slip if it were exposed to the speed and power of a hammer drill. A regular hammer drill is ideal for medium-duty masonry drilling. Bit, if you want to do more heavy-duty masonry jobs, we suggest using a rotary hammer drill.

You can attach different types of accessories to a rotary hammer drill according to your drilling projects, such as various chisels. You can use chisels for scaling metal, breaking concrete, removing the tile, and even digging the hard soil.

What Is The Easiest Way To Drill Into Concrete?

Depends on the type of your project. If you want to put one or two-hole, then a regular drill is fine. For a medium-duty task, you can use a typical hammer drill. But if you want to perform heavy-duty projects, we suggest you use a rotary hammer drill.

Conclusion

Drilling into concrete requires patience and the proper drilling technique. You can use a regular drill for occasional use of drilling holes in concrete. For medium-duty concrete drilling applications, a 12V cordless drill is just fine. We have discussed the steps, and if you follow our instructions, you should not face any trouble. But if you want to perform more heavy-duty concrete drilling projects, then a rotary hammer drill should be your weapon.

We hope our tutorial helped you with drilling holes into concrete. With excellent drilling skills and the best 12V cordless hammer drill, you can complete any light to the medium-duty task. See you in another tutorial.

7 Best Auger Drill Bits For 2021 | Detail Reviews

April 8, 2021 By Muhibbullah Shiddique

Welcome to the best Auger drill bits review. Auger drill bits are ideal for drilling holes in the wood. They are very popular for drilling into bulkheads and general timber applications. You may need a bit with various diameters to complete your whole project.

If you don’t have the best auger drill bits in your hand, even the best of the drills can not help you to complete the job perfectly. For you, we have tested more than 20 best auger drill bits in our store. We have read thousands of reviews to learn what people are saying about a particular auger drill bit.

After thousands of hours of research and testing, we have come up with the list of 7 best auger drill bits. Let’s have a dive into the middle.

7 Best Auger Drill Bit

Auger Drill Bit Garden Plant Tool
Eagle Tool US EA75036 Installer Drill Bit
IRWIN Weldtec Ship Auger Bit
SuperThinker Auger Drill Bit for Planting
Makita D-35900 Ship Auger Bit
DEWALT DW1687 Ship Auger Drill Bit
Woodrow 09709 Ultra Smooth Auger Bit

1. Auger Drill Bit Garden Plant Tool

If you are looking for a gardening expert best auger drill bit that saves precious time and effort, then this auger drill bit is an excellent choice for you. This garden auger drill bit will provide the best garden planting experience.

This is a non-slip hexadecimal drive and capable of digging post holes 11.8 inches deep, 3.2 inches wide. You can use these auger bit for a wide range of applications like such as bulb planter tools, beach umbrella sand holes, paint mix, ice fishing, fence hole, and many more.

This best auger drill bit from Lxiyu is made of Cold Rolled steel with a glossy black paint finish coating. Lxiyu’s patented design maintains a minimal distance between the digging blade start and the point. As a result, the garden spiral drill bit will start working on hard ground.

The kit is ideal for any standard 3/8″ cordless drill, battery drill, electric drill, etc. Moreover, you can dig a column hole or ice hole effortlessly.

Operations with this auger drill bit are straightforward and don’t demand a lot of force. The garden auger drill bit bulb planter tool is perfect for nearly every task.

Before you purchase, carefully check the size of this auger bit. And, when the auger bit is not in use, you should keep the auger bit clean. Not touching the soil and sundries can increase the life span of this best auger drill bit.

Key features

Dimensions : 12.5 x 3.7 x 3.6 inches
Size: 3.2in x 11.8in
Weight: 1.45 pounds
Garden Spiral Hole Drill Planter
Garden auger spiral drill bit

Pros & Cons

Pros

It comes with a non-slip Hex drive for better safety and efficiency
100% made of USA without outsourcing any raw materials outside the USA.
Offers a lifetime Craftsmans’ warranty
It is best for installing Beach Umbrellas, Hiking tents & planting small plugs.

Cons

Not ideal for drilling into the solid rocky surface.

Now You Can Buy Here

2. Eagle Tool US EA75036 Installer Drill Bit

The Eagle Tool auger drill bit is a perfect choice for all types of wood. It comes with an aggressive and self-feeding auger point. This self-feeding bit is capable of drilling holes into some of the most complicated wood you can get. It has three flat non-slip grips on the chuck end and a flexible spring steel shank.

For drywall projects, drilling into the ceiling for recessed lights, or other purposes, this auger bit can be your lifesaver. The ultra-sharp threads provide the best pulling power to this best auger drill bit. You can use this flexible auger bit to dig into blind areas without costly drywall repairs.

Key features

Dimensions : 36 x 0.75 x 0.75 inches
Size: 3/4 in.
Weight: 13.8 Ounces
Cutting Angle 45 degrees
Length: 36 inches

Pros

Aggressive and self-feeding auger point
100% made of USA
The non-slip grip on the chuck end
Sharp threads for pulling power
Flexible spring steel shank
Ideal for any type of wood.

Cons

Not as flexible as the company advertising.

Check Price

3. IRWIN Weldtec Ship Auger Bit

The IRWIN WeldTec 7/8-inch Auger drill bit comes with a formidable cutting edge and offers durability. Moreover, the welded cutting edge on this auger drill bit confirms an extended cutting life.

This Irwing auger drill bit can dig deeper holes and survives a long time. It comes with praiseworthy sharpness, and you can drill into any kind of wood effortlessly. The long length of this auger drill bit is ideal for all sorts of woodworking projects.

Key features

Dimensions : 18 x 2 x 2 inches
Weight: 1.15 pounds
Cutting Angle 45 degrees
Length: 17 inches
Diameter: 7/8 inch

Pros

It comes with a 17-inch overall length & 5/8 inches diameter
You can drill hard surfaces like hardwood and rocks with sharp cutting edges.
Wide flutes and a 7/16-” quick-connect impact shank provide added versatility.
Irwin guarantees its long last, durable drill auger.
This is also a wood best auger drill bit

Cons

For deep drilling, you have to give extra effort.

Order Now

4. SuperThinker Auger Drill Bit for Planting

This auger drill bit is an excellent value for money. This is made of heavy-duty steel and comes with a glossy black painted finish. Besides, the auger drill is amazingly versatile.

This auger drill bit is ideal for planting tulips, iris, bulbs, bedding plants, and seedlings. You can use this auger bit for drilling a hole for a fence post or an umbrella. Moreover, it is suitable for tilling the soil, digging weeds, mixing seed, soil, fertilizer, batches of mortar mix for hardscaping or paint. The heavy-duty high-speed best auger drill bit from Super thinker is built to last.

You can plant hundreds of bulbs in minutes effortlessly. With this versatile and fast best auger drill bit, you will be able to save a lot of time. If you are looking for the best auger drill bit for your garden, we will recommend this auger bit as it beats other auger bits in many ways.

Key features

Dimensions : 5.12 x 0.79 x 1.18 inches
Weight: 4.8 ounces
Size: 1.6 inches x 9 inches
Diameter: 2 centimetre
Garden auger spiral drill bit
Garden Spiral Hole Drill Planter
Garden auger spiral drill bit

SuperThinker Auger Drill Bit for Planting

Pros

Made of heavy-duty steel, and a glossy black painted finish makes this drill durable.
With this auger drill bit, you can plant bulbs and bedding plants anywhere you wish
It saves time and easy to use.
You can use this auger bit for a wide range of applications.
Quickly digs holes up to 9 inches deep and 1.6 inches wide.

Cons

Not ideal for drilling into the rigid surface.

Order Now

5. Makita D-35900 Ship Auger Bit

Makita is a renowned brand for drilling machines. Like their drilling machine, this auger drill bit also provides high-quality. It has a sharp and robust cutting edge that can pierce through any solid wood effortlessly.

You can bore a 16-inch hole even in the toughest tree log. Moreover, the auger drill comes with a nice reusable tube to protect it when I put it away.

Key features

Dimensions : 20.87 x 1.38 x 1.38 inches
Weight: 1.06 pounds
Size: 13/16 inch X 18 inches
Diameter: 7/16 inch
Engineered Wide flutes for faster chip removal

Pros

Hard and sharp cutting-edge quickly cuts through wood with maximum efficiency.
The Thick edge cuts through nails fast and effortlessly
Screw point pulls the bit through materials allowing faster drilling.
You can use this auger bit for a wide range of applications.

Cons

Not ideal for cordless drilling machines.

Check Price

6. DEWALT DW1687 Ship Auger Drill Bit

If you are a power tool user, there is no way you did not hear about the brand Dewalt. Like their cordless and corded drill driver, this DW1687 is also a powerful auger bit for drilling through any kind of wood.

The self-feed spur of this auger drill bit is well designed and can penetrate really fast. The dual cutting edge of DEWALT drill bits is built for the highest durability in nails. Digging a 17 inc hole in a solid wood log is simple when you are using the Dewalt DW1867 auger drill bit in your hand.

The hardened alloy steel offers superior bit life. Moreover, it comes with a 1-year warranty, and you can use this auger drill for a long time.

Key features

Dimensions : 8.2 x 1.8 x 1.8 inches
Weight: 1.5 pounds
Diameter: 7/16 inch
The self-feed spur for fast material penetration

Pros

Dual cutting edge drill bits provide maximum durability in nails
Hardened alloy steel offers superior bit life
It comes with a 7/16-inch ball groove shank, easy for quick bit changes
Can drill a 17-inch hole effortlessly.

Cons

Can not drill through hard surfaces such as a brick wall.

Check Price

7. Woodrow 09709 Ultra Smooth Auger Bit

As the name suggests, this best auger drill bit from Woodrow is a smooth auger drill bit that you can use for any kind of woodwork.

This auger bit is ideal for both DIYers and professional workers. We have found many positive reviews from woodworking professionals that are using these auger drills. And, we were not surprised that most of the reviews were positive because this auger bit showed very effective performance while we tested it in our lab.

Though the auger drill bit does not come with a straight warranty, you can get one by contacting their customer service. We will highly recommend this auger bit for woodworking professionals as we think this is one of the best auger bits in the market now.

Key features

Dimensions : 7.5 x 0.75 x 0.75 inches
Weight: 4.8 ounces
Size: 3/4 inch x 7-1/2 inch
Carbon Steel and High Carbon Steel made

Pros

It works on any wood perfectly.
It comes with a Tri-Cut triple edge spurred design to ensure fast drilling.
It has an ultra-smooth cutting to make the finished holes precise.
Lighter weight.

Cons

Pricy

Buy Here

Expert’s Tips on Auger Drill Bits

To extend the best auger drill bit’s lifespan and use it for a long time, you have to follow some rules. It would be best if you cleaned the auger bit after each use. You’ll have to remove the bit from the drill and give it enough time to cool for cleaning. Remember, it is a bit hot at that time to touch it. We recommend using a toothbrush to remove the remaining soil. Wipe the drill bit clean with a soft cloth and then store it in a location where the auger bit won’t face extra humidity.
When planning on purchasing your best auger drill bit, do your research. When you did the research and narrowed down the list, then look at the price. We always recommend purchasing an auger drill bit that is affordable to you. “A pricy thing is always better” is not a formula you can use when you are buying the best auger drill bit.

Frequently Asked Questions

What Is An Auger Drill Bit?

An auger drill bit is a kit to drill wood or other materials. Auger drill bits are consist of a rotating metal shaft with a blade at the end that scrapes or cuts the wood.

What Is The Difference Between An Auger Drill Bit And A Regular Drill Bit?

Auger bits are more efficient at cutting wood. Moreover, auger bits are very good at clearing waste material from a borehole than regular drill bits.

How Do I Use An Auger Bit?

You can use auger drill bits in any standard drilling machine. Both cordless and corded drills are suitable for using auger drill bits.

How Deep Can An Auger Drill?

Most auger drill bits can dig more than 2 feet hole. You can get auger drill bits that can drill 3 ft holes quickly in the market.

What Does An Auger Bit Look Like?

Carpenters and DIYers use auger bits for drilling holes in wood. Auger drill bits look like a corkscrew and comes with six parts: screw, spurs, cutting edges, twist, shank, and tang. The design of the screw is such as a tapered wood screw and is small in diameter; it stays at the top of the auger bit and fixes the way to drill into the work.

Final Words

Auger drill bits are convenient for DYI works and carpenters. You can use the best auger drill bits for a wide range of applications, from drilling into the wood to plant in your garden. Finding the best auger drill bit can be tricky for even the most experienced DIYers & should consider it before you purchase one for yourself. So, you should browse auger drills, read their specifications, use and then buy one. Remember, you should take proper care of your best auger drill bits if you want to use them for a long time.

We hope our review of the best auger drill bits helped you, and now you are confident enough to find the best auger drill bit for you.

10 Best Cordless Impact Wrench For Automotive 2022

April 4, 2021 By Muhibbullah Shiddique

Best cordless impact wrench for automotive review: If you are looking for the best cordless impact wrench for automotive to buy one for you, then you have come to the right place. Here we will review the 10 best cordless impact wrenches for automotive from the market.

Doesn’t a rusted bolt frustrate you? Why not? It is the most challenging task to remove a rusted bolt without the perfect power tool. And the ideal power tool is the Impact wrench, to be more specific, the best cordless impact wrench for automotive. Cordless impact wrenches came a long way, and now it is essential for DIYers and professionals.

We have tested all 20 best cordless impact wrenches. Then we read thousands of users’ reviews on those impact wrenches. After more than 1000 hours of hard work, we created the list of the 10 best cordless impact wrenches. We have categorized our selection so that you can find the best cordless impact wrench for automotive that suits your needs.

Best Cordless Impact Wrench for Automotive Reviews

1.DeWalt DCF889M2 20V MAX Best Cordless Impact Wrench Kit for Changing Tire

Dewalt is a reputed name in the power tools industry. Like their drill/driver, the DCF889M2 is also a trendy cordless impact wrench kit. The compact drill does not come with the same torque as the Milwaukee M18 Fuel, but it is a lightweight and compact impact wrench that easily fits into a tight space, making the job straightforward even in a challenging situation.

DeWalt DCF889M2 20V MAX - Cordless Impact Wrench — DeWalt DCF889M2 20V MAX – Cordless Impact Wrench for Automotive

Dewalt DCF889Me comes with an excellent electric brake which reduces the risk of rounding nuts if you pull away just when you release the trigger.

This power tool’s weight is 7.2 pounds; the lightweight is achieved by using magnesium in the driving mechanism. The all-metal transmission brings more dependability and extends the life span of the wrench by a great deal.

The tool runs by XR lithium-ion batteries, which is a Dewalt patented technology. These battery packs deliver more amp-hours into a single charge. The best cordless impact wrench kit from Dewalt comes with 2 batteries meaning you can keep working for extended periods.

The torque is 700 inch-pounds, and for Max breakaway, 1200 foot-pounds of torque are more than enough to perform household jobs. Also, it has a brushless motor which makes all cordless impact wrenches more efficient and long-lasting.

Moreover, The best cordless impact wrench for automotive comes with a LED light with a 20-second delay that means the tool will illuminate the working space for 20 seconds after you release the trigger. A handy feature as you might have to work with impact wrenches in a low-light situation.

Key Specifications:

Dimensions : 17 x 10.5 x 9.5 inches
Weight: 7.2 Pounds
Volt: 20V
Motor: Brushless
Size: 1/2 inch
Max Torque: 700 foot Pounds
Warranty: 3 years limited warranty

Pros & Cons

Pros

Compact design 8-13/16 inch in length
Multi-speed control
700 foot-pounds torque
1/2″ Anvil with detent pin
LED working light

Cons

High price
It can feel slightly heavy for some users.

Check Price

2. Milwaukee 2767-20 M18 Fuel Impact High Torque Best Cordless Impact Wrench for Automotive

This is a 1/2 inch battery-powered impact wrench by Milwaukee that is highly compact, delivering tremendous power from its brushless motor. Cordless impact wrenches came a long way over the years, and this Milwaukee m18 fuel is an excellent example of this.

The built-in four-mode drive control comes with a bolt removal mode to improve management while operating. And the friction ring allows changing sockets quickly and easily. You will get more control on Bolt Removal mode when removing fasteners by slowing to 750rpm once the fastener has been busted loose.

Milwaukee m18 fuel is one of the best cordless impact wrenches. REDLITHIUM batteries power it for longer battery life, and the Milwaukee patented REDLINK PLUS intelligence system prevents overheating. Also, This cordless impact wrench helps a quick and tool-free socket change with a 1/2 inch anvil.

Moreover, the power tool is equipped with a rubber over-mould that does not provide more comfort and protects the wrench from corrosive elements.

With 1,000 foot-pounds of torque and a maximum breakaway of 1,400 ft-lbs pounds of torque, Milwaukee m18 fuel easily the most powerful impact wrench on our list.

Key Specifications:

Dimensions : 3.46 x 10.23 x 9.05 inches.
Weight: 5.91 pounds.
Volt: 18V.
Motor: Brushless.
Size: 1/2 inch.
Max Torque: 1,000 ft-lbs.
Warranty: 3 years limited warranty upon online registration.

Pros & Cons

Pros

High torque fasters work 2 times faster than then-rival impact wrenches
Most cordless impact wrench of this class
4-mode drive control
Friction ring design confirms quick and easy socket changes
Premium rubber over-mold
LED light

Cons

The vibration can be annoying

Check price

3. Neiko 10878A 20 V Lithium-Ion Best Budget Best Cordless Impact Wrench for Automotive

Neiko 10878A is a powerful one of the best cordless impact wrench kits, which is pretty much compact compared to other options with its price range. If you are on a tight budget, this impact wrench Is a very choice for you.

Neiko 10878A 20 V Lithium-Ion Best Cordless Impact Wrench for Automotive

This Neiko 10878A is one of the most affordable best cordless impact wrenches available in the market right now. The tool did not compromise with the quality even though the price is low compared to many other best cordless impact wrenches. You will get a 20-volt battery system in it with a fast-charging charger. Because of this fast charger, you can quickly recharge the battery and don’t have to wait too long to complete the work at hand.

With this powerful battery, you will get a maximum motor speed rotation of up to 3000 RPM. Neiko 10878A is a high torque impact wrench with a torque rating of 300 feet pounds.

This heavy-duty best cordless impact wrench for automotive comes with a no-load speed of 0 to 3000 RPM and impacts frequency of 0 to 3500 BPM allowing high performance. It is equipped with a variable speed trigger which provides your complete control over the torque.

You can work in the dark with this impact wrench as it has a LED light at the base. The battery comes with an indicator so that you don’t worry about the tool’s sudden death.

Neiko offers a 1-year warranty for this tool which is not enough, but you can not complain when you are getting such a powerful best cordless impact wrench at such an affordable price.

Key Specifications:

Dimensions : 14.92 x 10.94 x 4.88 inches
Weight: 10.76 pounds
Volt: 20V.
Motor: Brushed.
Size: 1/2 inch.
Max Torque: 300 Foot Pounds
Warranty: 1-year warranty

Pros & Cons

Pros

various torque ranges allow fastening and removing the bolts easily
Renowned for great performance
Dual fastening mode with multiple torque ranges
3000 RPM
It comes with free accessories
Budget-friendly
It comes with a faster charger

Cons

Overweight
No brushless motor
Plastic body

Check Price

4. DeWALT DCF899HB 20V Best Cordless Impact Wrench Kit For Automotive

DeWalt products are synonymous with quality. This Dewalt DCF899HB is no exception. This cordless impact wrench comes with a heavy-duty impact mechanism that brings a max breakaway torque of 1,200 ft-lbs with a max 700 ft-lbs of tightening torque. It also has a brushless motor which confirms extended efficiency and more durability.

Besides, the hog ring allows for fast socket changes. The LED work light gives you extra visibility with a 20-second delay.

This tool is chemical resistant and can even handle an eight-foot drop without damage. From our experience, this is one of the best cordless impact wrenches on the market for both home and industrial auto shops.

You can use this in various automotive tasks. You can use this compact and powerful impact wrench kit in both vehicle maintenance and home or professional garages.

In addition, like other Dewalt power tools, you will get a 3-year limited warranty with this tool.

Key Specifications:

Dimension : 9.94 x 4.25 x 10.63 inches
Weight: 6.4 pounds
Volt: 20V.
Motor: Brushless.
Size: 1/2 inch.
Max Torque: 700 Foot Pounds
Warranty: 3-years limited Warranty

Pros & Cons

Pros

Durable
Suitable for removing rusty bolts
3-speed settings for faster work
Excellent torque range
Good battery capacity
3-year warranty
Good for heavy-duty jobs
LED lights
Compact design
It comes with a 1/2-inch anvil attachment

Cons

Bare tool, does not come with battery or charger
Pricey

Check Price

5. PORTER-CABLE PCC740LA 20V MAX Best Cordless Impact Wrench for DIY

This cordless impact wrench from Porter-Cable is ideal for most people for doing maximum DYI tasks at ease. This tool has a 1/2 inch anvil with a hog ring to help socket change. This Porter-Cable impact wrench can make 2,500 impacts per minute to drive things down faster. It has 330 ft-lbs of torque which is sufficient for general tasks around the house or the auto shop.

The no-load speed is 1,700 rpm thanks to its powerful 20V brushed motor. We would love to have a brushless motor with this powerful impact wrench, but brushless motors are expensive too. This device comes at an affordable price. The bare tool is compact and light, weighing about 4.6 pounds. The instrument measures almost 10 inches from front to back.

This tool comes with a complete kit with batteries and a charger. However, the included charger is not that great and takes a long time to charge the battery; you can purchase a fast charger anytime. Lithium-ion batteries are powerful, and this tool’s lithium-ion battery generates 20V of power. Working in the dark with this tool is easy as it comes with a LED light also.

Key Specifications:

Dimensions : 9.9 x 3 x 7 inches
Weight: 6 pounds
Volt: 20V.
Motor: Brushed.
Size: 1/2 inch.
Max Torque: 330 Foot Pounds
Warranty: 1-year warranty.

Pros & Cons

Pros

3-year warranty
Lightweight
Built-in LED
G auto LED light
1,700 RPM
330 ft-lbs of torque

Cons

No speed controls
Cheap charger

Check Price

6. Makita XWT11T 18V LXT Best Cordless Impact Wrench Kit

Makita maybe that famous like Dewalt and Milwaukee, but the brand has been producing some incredible power tools over the years., The 3-speed Makita XWT11T brushless cordless impact wrench is a good choice if you don’t need a powerful monster for your daily use.

The tool can run on either 2.0Ah or 5.0Ah Makita batteries, with the latter providing up to 65% more run time.

With this impact wrench, you will get 210 ft/lbs of max torque are at your disposal. This torque is enough to use with sheet metal, shop work, and other light to medium duty applications.

The batteries can generate ample power so that you can work for an extended period.

This unit is equipped with a built-in power indicator meaning you don’t have to worry about when the battery dies as the gauge will tell how much power is left. However, some complaints about this tool’s low torque, but that should not be a problem for typical household works.

Besides, the 3-speed settings is a blessing as it will provide you with the complete freedom over the torque.

Key Specifications :

Dimensions : 12.5 x 22.5 x 11.5 inches
Weight: 11.7 pounds
Volt: 18V.
Motor: Brushless.
Size: 1/2 inch.
Max Torque: 210 Foot Pounds
Warranty: 3-year limited warranty

Pros & Cons

Pros

A Brushless motor delivers 50% more runtime than a brushed one.
3-speed setting
Reverse rotation auto-stop mode
5.0 ah battery
BL1830 battery
Contractor bad
3-year warranty

Cons

Overweight

Check Price

7. DeWALT DCF889B 1/2-Inch 20V MAX Brushed Best Cordless Impact Wrench

This is our third pick from Dewalt, and why not? This Dewalt DCF889B produces a max of 20V and 300 ft-lbs. You’ll see some other corded impact wrenches, but the numbers are pretty standard for impact wrenches. Most lug nuts will come off with ease with that power, and the stuck ones will need some extra effort.

It has a ½ inch, and that’s not adjustable. Thankfully, ½ inch impact wrenches are the most versatile, and for your first impact wrench, you will want one of those.

The comfort of the grip isn’t that important when you are carrying your impact wrench. But when you use it, comfort is crucial for not hurting your wrist and moving the impact wrench around effortlessly. This model from Dewalt comes with an ergonomic grip that produces extra comfort. Talking about the size, the 10 inches in length of this impact wrench makes it one of the smallest in the market. Moreover, the weight is only 2.77 pounds which is very light compared to some other cordless impact wrenches in this list.

This tool is equipped with a variable trigger setting that provides 100% control over the torque and flexibility of doing every job with perfection. Like all other Dewalt products, you will get a 3-year limited-time warranty with this product also. You can purchase this cordless impact wrench without any doubt in your mind.

Key Specifications:

Dimensions : 10.75 x 3.94 x 8.88 inches
Weight: 2.77 pounds
Volt: 20V.
Motor: Brushed.
Size: 1/2 inch.
Max Torque: 350 Foot Pounds
Warranty: 3 years limited warranty

Pros & Cons

Pros

10 inches in length, it is the smallest impact wrench out there
Variable speed trigger
Electric brake to minimize damage
400 Feet/Pound of torque for performing a wide range of applications
Designed for mechanical contractors, plumbers, automotive users
3-year limited warranty

Cons

A bare tool that means does not come with a battery or charger.

Check Price

8. CRAFTSMAN CMCF900M1 V20 Best Cordless Impact Wrench Kit for Lug Nuts

Craftsman is not a famous brand like Dewalt or Milwaukee, but many users definitely love its cordless impact wrench. The CMCF900M1 is a powerful impact wrench with lots of torque. It can generate 20V output with a max torque rating of 350 ft-lbs.

With this tool, you will be able to easily remove lug nuts and most larger bolts on a car. Moreover, the quick battery charger will charge the 20V battery in a short time, meaning you don’t have to wait too long to finish your job.

When you are browsing the best impact wrenches, a variable speed trigger is what you should look for in the wrench in your hand. The variable speed trigger helps you to control the torque and makes working with different power requirements easy. Craftsman CMCF900M1 is equipped with a variable torque with a max of 1,700 RPMs.

The 20V 4ah high-capacity battery provides extended battery life so that the tool can generate increased power. The charger can charge the battery for under 60 minutes which is quite impressive. You will get a 3-year warranty with this impact wrench kit which is also very generous of the brand.

Key Specifications:

Dimensions : 12.75 x 2.86 x 9.79 inches
Weight: 7.6 pounds
Volt: 20V.
Motor: Brushless.
Size: 1/2 inch.
Max Torque: 400 Foot Pounds
Warranty: 3-year limited warranty.

Pros & Cons

Pros

Hog ring anvil for easy socket changes
Variable speed trigger
1/2 impact wrench can remove the lug nuts on your car
4Ah High Capacity Lithium battery for extended battery life
350 Feet/Pound of torque for performing a wide range of applications
Fast Charger

Cons

Slightly oversized and heavy.

Check Price

9. Ryobi R18IW3-0 ONE+ 3-Speed Best Cordless Impact Wrench with Kits

If you are looking for removing nuts even from an 18 years old car, Ryobi R18IW3 will definitely help you.

Kobalt 24-Volt Max-Volt 12-in Cordless Impact Wrench

This tool comes with an 18V lithium-ion battery powerful enough to deliver up to 300 ft-lbs max torque. This torque enables you to tackle even the toughest wheel nuts and driving applications. It is equipped with a 1/2 inch square drive locking pin for an accessible socket.

This impact wrench from Ryobi is a powerful driving tool. This tool produces high torque and an ergonomic design that helps you work for a more extended period of time without hurting your wrist.

Variable speed settings are essential for precious works. This tool comes with 3-speed settings of 0-2,100 rpm for precision works, 0-2,500 rpm for fastener works, and 0-2,900 rpm for heavy-duty applications.

The new tri-beam LED lights to mean that you can work even in the darkest workspaces without shadows on your fasteners and bits.

With a lithium-ion+ 4.0Ah battery, this wrench will fit up to 100 wheels per charge, thanks to Ryobi’s advanced battery technology.

Key Specifications :

Dimensions : 9.13 x 31.5 x 78.74 inches
Weight: 3.72 pounds
Volt: 18.
Motor: Brushed.
Size: 1/2
Max Torque: 300 ft-lbs
Warranty: No warranty

Pros & Cons

Pros

3-speed settings offer added control and versatility
1/2in square drive with locking pin allows straightforward socket fitment
High power motor delivers up to 300 ft-lbs of torque
Low vibration design
Includes 1/4″ hex adapter to fit screwdriver bits

Cons

No brushless motor

Check price

10. Kobalt 24-Volt Max-Volt 1/2-in Drive Best Cordless Impact Wrench With Power

If you are looking for a complete beast for your daily repairing or bolt fastening works, this Kobalt 24V max cordless impact wrench can be your impact wrench. This tool generates 650-foot pounds of maximum torque. The 24 volt 4ah high capacity battery is powerful enough to support your automotive or other applications for a more extended period of time.

It has variable speed settings that generate 0-1,900-RPM no-load speed and 2,400-IPM for faster application speed. With these variable speed settings, you will get 100% control over this unit’s high torque and complete any kind of task effortlessly.

With Cordless impact wrenches working in the dark is a regular staff. But don’t worry, this unit has a built-in LED light so that you can work at night or when there is no or less light without facing any trouble.

The design is compact, and the kit comes with an attractive tool bag. If you find a cordless impact wrench for medium to heavy-duty tasks, we highly recommend this Kobalt impact wrench.

Key Specifications:

Dimensions : 11.4 x 10 x 8.4 inches
Weight: 7.6 pounds
Volt: 24V.
Motor: Brushless.
Size: 1/2 inch
Max Torque: 650 ft-lbs

Pros & Cons

Pros

Highly-efficient brushless motor
650-ft-lbs of breakaway torque
Variable-speed trigger
Built-in LED work
24-volt max 4.0-Ah Li-ion battery

Cons

Slightly overweight but okay for a heavy-duty tool.

Check Price

The Buyer’s Guide for Best Cordless Impact Wrench

Still, are you not convinced with our list? Or want to know a little bit more about the technical stuff of cordless impact wrenches? We know, at first, all the terms, units can be confusing for many new users. That’s why we have prepared the user guide for you so that you can understand the technical part and watch it before you purchase your cordless impact driver.

Before purchasing an impact driver, you should look for the followings:

More power is better. A powerful impact wrench should deliver 200 ft-lbs max torque.
High RPM (rotation per minute) – over 3000. High RPM will make all applications easy.
High IPM (impact per minute) is another factor that affects the reduced risks of human errors;
Weight – The best cordless compact wrenches should be lightweight and portable if you want to apply as little effort as possible;
Compact- These days, most cordless tools are compact. But before purchasing an impact wrench, make sure it is compact, as you have to work with it in many challenging places.

Motor

All these wrenches are powered by two motor types – brushed and brushless. Typically, most modern cordless compact wrenches have brushless motors because they provide 50% more runtime than brushed motors. Also, brushless motors offer a longer life for your tool and do not make noises. On the other hand, brushed motors make the wrench less weighty. The most important thing is the price when we are talking about the engine. Because the cost of the tool largely depends on the motor type.

Brushless motors are expensive, while brushed are less expensive. So, if you are on a tight budget, you can purchase a brushed cordless impact wrench as there are many good brushed tools even these days. But if you want to hear our honest opinion, go for the brushless one.

Power

Power is vital for impact wrenches as the purpose of getting an impact wrench is to do the work with the wrench’s impact power to save your hand. It means that impact wrenches need less effort and time to tighten or loosen even the most “stubborn” bolts.

Undoubtedly, power is achieved through the intelligent design of cordless impact wrenches. Such tools primarily work from batteries. But how would you define a powerful battery? Let’s dig a little deeper.

Volts

The higher voltage, the higher the power. But don’t be overwhelmed by this theory as wrenches with lesser voltage and batteries (for 12 Volts) tend to be more portable. You should use such lightweight tools for light and medium-duty applications. Also, grab those instruments when you need to work overhead safely. However, 18V or higher will deliver extra power for heavy-duty projects.

Amp Hours (Ah)

Ah is another critical parameter to check in the tool’s battery. This number tells how many amps the battery can discharges per 1 hour of intensive work. Think of it as the volume of a car’s gas tank. If the number is higher, the battery will contain a charge for longer. It means higher ah confirms higher battery life. If you are looking for a heavy-duty cordless impact wrench, you should go for higher ah as with that; you will be able to work for a long time with one single charge.

Drive size

Impact wrenches come in different drive sizes for various bolts and screws. Mostly, cordless wrenches feature adjustable drive sizes. The higher the drive size, the higher the torque you will get. You should stick 1/2-inch drivers as it is the most versatile one. If you require a smaller drive size – 1/4-inch or 3/8-inch – we suggest purchasing a wrench with an adapter.

Speed Setting

Not all work demands the same speed. If you do a lesser torque work with higher torque, that can damage your precious material. That’s why we suggest purchase a cordless impact wrench that comes with various speed settings with a speed managing trigger.

The best cordless impact wrenches in the market have various speed settings. Pick one that best suits your need. If you think of a specific work, you can go for a single speed wrench, but we will never recommend you to do that.

Usability

Typically you need an impact wrench to put or take out screws, bolts, lug nuts in vehicles like cars, autos, bikes, boats, etc. You will need a pulse-type wrench when you need to change the wheel’s tire and then assemble the parts again with properly tightened bolts.

Besides, DIYers and automative repairs will need different types of impact wrenches. So, don’t just go for higher torque, higher battery, or brushless motor. You should understand your need first and then purchase that one which is ideal for your type of job.

Final Words

You can use a cordless impact wrench for various projects at your home or a job site. Since these are cordless, you don’t need to worry about the cord or power source. Just charge the battery, and you are set to start the job. But before purchasing your impact wrench, you should know which one is best for you, which one is your best cordless impact wrench.

That’s why we tried to put all types of cordless impact wrenches from all possible categories. We also added the buying guide for those who will buy this incredible tool for the first time. We hope our list and guide helped you a bit. We will come back again with another review of another kind of power tool. Until then, it’s goodbye. Best of luck with your new cordless impact driver.

Bosch PS31 2A 12V Cordless Drill Driver Kit Review

April 3, 2021 By Muhibbullah Shiddique

The Bosch PS31 2A is such a product – a cordless drill/driver with a very affordable price and a top-class performance. When it comes to power tools, there are a few manufacturers that can be compared to Bosch.

This German electronics company is an innovation hub and one of the best-known power tools suppliers. Established in 1886, the company is famous for innovation, research, quality, trustworthiness, and efficiency. The company has been manufacturing durable and high-performing cordless drills for many years.

As expected, this model is very popular with both amateurs and professionals. The cordless drill driver comes with a set of features that make this power tool victorious over other tools in the market. It is Lightweight, has variable speed settings, durable lithium-ion batteries included, and produces high torque. And these are just a few of the conveniences that the cordless drill driver brings.

Whether you own a house or weekend warrior DIYer and plan to undertake small applications around the house without spending lots of cash, the Bosch PS31 – 2A 12V Max Lithium-Ion is the perfect drill driver for you. Our verdict is this is the best value 12V Max Lithium-Ion drill around.

Though the drill can’t match the drilling and driving ability of the high-end professional-grade applications, it is well capable of providing sufficient power and durability for most ambitious home or DIY projects. In this review of Bosch PS31 – 2A, we will uncover all the features, benefits, and all those things you can know about this powerful and versatile drill driver.

Who’s it for?

Homeowners or contractors that want a power tool that can handle most tasks will feel at ease with the Bosch PS31 – 2A.

The manufacturer designed the product for those who don’t need a workhorse for their projects. A heavyweight and giant drill will tire you out, but this won’t, and at the same time, it is perfect for doing light to medium-range drilling driving applications. DIYers, electricians, and other contractors will like this drill as well, especially those that work with overhead installations.

Technical Specifications of Bosch PS31

Type: Cordless Drill
Weight:1.8 pounds
Speed: 2-Speeds
Torque: Adjustable 20+1
Battery : 12V Lithium-ion Battery
Battery Chemistry: Lithium-Ion
Battery Voltage (V): 12
Battery/Charger: 1 Hour Charger
Charger: BC330 – 60 Minute Charger
Chuck Design: Keyless
Chuck Size: 3/8 in
Length: 7.0″

What comes with the package?

Bosch PS31 12V Max 3/8 In. Drill/Driver – 1
12V Max Lithium-Ion 2.0 Ah Batteries – 2
12V Max Charger – 1
Screwdriver Bits – 2
Carrying Bag – 1

Bosch PS31 2A 12V Lithium-Ion Drill Driver- At a Glance

Bosch PS31 – All Drill Sets

The Bosch ps31 2A weighs under 2 pounds, making the tool transportable and manageable to work all day long.
It comes with the speed specification of 2 mode settings.
It comes with a particular compact head length that is only 7 inches, making it useful for reaching tight areasand completing hard-to-manoeuvre tasks.
The Bosch ps31 2A equipped with enhanced visibility providing by the integrated LED lights that can support the users in the dark corners
It is equipped with a torque setting of 20 +1 for more delicate and flexible, and precious
Bosch PS31 – All Drill Sets

drilling.
It contains a 3/8-inch single-sleeve chuck which useful for 90 % of all applications.
It comes with a comfortable handle that feels very good in the user’s hands. The grip fits firm and robust and perfectly to the hands.
The Bosch ps31 2A has Electronic Cell Protection for longer life.

Detailed Features of Bosch PS31

Design

With a weight of only 1.8 pounds and the size of 12.6″ x 9.8″ x 4.2″, the PS31-2A 12V lithium-ion is super easy to use. The compact, lightweight design makes Bosch ps31 perfect for working in tight and hard-to-reach areas. Because of this design, this cordless drill driver is the best for overhead applications.

The 7-inch head length allows for manoeuvring the drill in challenging corners. Moreover, you will not feel any strain in your hands or feel tired after a long time of drilling activities.

The grip handle is soft, comfortable, and fits effortlessly. From the grips, you can easily reach the controls. Many big names in the power tools industry failed to do so.

It would be best if you did not worry about the durability and life span of this drill. The Bosch ps31 2A has been constructed from Durashield (a blend of Nylon and ABS) and can tackle drops of up to 12 feet.

This lithium-ion drill/driver also comes with a 3/8-inch single sleeve chuck. There is a fuel gauge located on the side of the tool for effortless battery management. The fuel gauge is placed on the side of the tool for easy battery management.

Durability

After power, durability is one of the first things we consider before purchasing a cordless tool of any kind.

Convenience and portability are the primary two purposes of cordless drills. So, every manufacturer tries to build a cordless drill driver that is compact and lightweight. And they use those materials that will serve the purpose. As a result, metal parts are few and far between because of weight concerns.

That means in cordless drills; you’ll deal with plastic housings and chucks in a few cases. So, the tape measure won’t do any good to you if the drill breaks after a few months and remain useless from a shortfall if it’s cheaply made.

It’s one area you should l not worry about if you are dealing with the Bosch PS31-2A. The product is made from a type of plastic but built with Durashield, a unique blend of ABS and Nylon.

These materials add durability to the casing. Moreover, the tool has survived a test drops up to 12-feet, which is very much impressive, as the model is not an industrial one. Talking about the chuck, it’s sturdy but a level up with other drill sets at this price.

Bosch produces a three-jaw chuck with a single-sleeve and no key. The chuck is quick and efficient as it’s not built with metal so that it won’t hold up as well over time. Also, there is an auto-lock feature, and the chuck accepts bits up to 3/8″ in size, and that size is standard for drills of this size and power.

Power

There is no doubt that small power tools are handy. And the Bosch PS31-2A is undoubtedly compact, and as such, it has sacrificed some horsepower but in a great deal. It still enough for doing indoor and many professional drilling driving applications.

It has a top speed of 1300 RPM, and that is enough power to drive or remove small to large screws and drill medium to big holes just like the rest of the pack. The torque is higher than you can expect at 265 in/lbs from such a light and small cordless drill driver kit.

You will notice a drop-off if you had been using a higher-powered drill, so you should know your needs well. But, we can assure you that if your needs are not as high as an industrial drill driver kit, then the horsepower that bosch PS31-2A brings will be sufficient for you.

Moreover, you’ll get 20+1 clutch settings so that you can tweak the torque as per the operation needs. This drill has two speeds with 0-350 RPM and 0-1300 RPM. You can make accurate torque adjustments for precious screw-driving and drilling. Besides, you can enjoy the tool’s soft grip, and you can optimize your grip while drilling.

High-Performance Motor and Grip

The new Bosch PS31 – 2A 12V Max Drill/Driver comes with a high-performance frameless motor that lessens the head length even more from their first-generation tool. The motor is still equipped with all-metal gears set inside an aluminum housing.

If you look at earlier tools, what tweaks they have made is that Bosch has pulled back the clutch even further. As a result of this change, the grip sits atop the integrated LED light rather than in front of it.

The handle angle has aligned to the new design, and the drill indeed feels balanced in hand. Do not tip forward or back during the operation.

Bits go in and out effortlessly, and we also liked the easy-grip provided by the chuck. However, this could get slippery if your hands were sweaty or wet. We suggest you wear hand gloves to be on the safer side. Again, the variable speed trigger allows ample control. We got a positive outcome.

Ease of Use

One significant advantage that the drill is that how effortless it is to use. The Bosch PS31 – 2A measures only 7” x 2.5” front to back, so it won’t occupy much space in your bag and only weighs 1.8 pounds.

A Lightweight drill is always more comfortable during excessive use, and cordless drills are even a great choice when weight is your concern. The Bosch PS31 – 2A comes with a slim figure and uses a narrow battery that slides into the handle and never protrudes. And as it isn’t the most potent compact drill driver, your hands and arms will remain fresh even after using for an extended period.

The pistol grip handle is very much soft where it counts, and the large trigger of this drill confirms you won’t miss your mark. Moreover, there is an integrated LED light to help by illuminating your work area.

Controls are straightforward to reach on this bosch PS31 2A as well. The reverse button is placed on the side next to rest your thumb while working. The torque ring is located behind the chuck, and you can control the speeds with a switch up top.

Lithium-Ion Battery with Extended Battery Life

The battery life is excellent given the power it generates and the compact size of the tool. So, you don’t need to run to the charger every hour. Because of the motor’s size and the fact this drill is a 12V cordless drill, it’s designed for regular use. So, battery life won’t be a concern.

The package comes with two Lithium-ion batteries; both are rated at 2.0 Ah. You also can replace the batteries by spending some extra bucks. which is par for the course on cordless models.

As it is a power tool, how long the battery will last depends on the type of applications you perform with your drill. More demanding and challenging tasks will demand more power, and light jobs will require less. But do not worry, the battery recharges in just under 30 minutes.

Integrated LED Light for Improved Visibility

With a small cordless drill/driver, you can nearly everywhere, but what if the place does not have enough light or you prefer working at night? In that case, the compact size and less weight aren’t going to help you. Therefore, the Bosch PS31 2A comes with integrated LED light to help you work in a low light situation or at night.

The LED brightens dark corners and low-light areas and confirms that your visibility is never compromised. In addition to providing illumination, this cordless drill driver is also got Bosch’s Electronic Cell Protection (EPC), which extends the run time and lifespan of the tool.

Contractor Bag

The tool arrives in a well-protected retail box with a contractor bag inside. The zippered case that brings the tool is just large enough to store your tool, batteries, and the included charger within. The tool and other accessories will stay secure under flexible straps, and the bag has a hook & loop strap for the PS31-2A Drill/Driver. The case has sufficient space to keep everything inside and won’t allow placing the tool inside if loaded with any sort of bit.

Affordable Pricing

Another important thing that makes this Bosch PS31 2A 12V max very popular is its cost-effective price. The cordless drill driver is a true testimony that you can get a valuable and dependable power tool at affordable pricing.

It offers sufficient value for its price given that the charger, 2 Li-ion batteries, the drill driver kit, and the contractor bag come with the package for the price.

Warranty Information

Bosch’s Pro-Vantage warranty backs the Bosch PS31 2A 12-volt max Cordless drill/driver. In the first year, you will get a tool replacement guarantee, and in the second and third years, you will get the free tool repair pledge. The tool will get a warranty for three years and the batteries for two years. This warranty protocol does not cover part failure due to normal wear or tool abuse. So, keep your purchase record to claim the warranty.

30-day money-back guarantee- If any user is not completely satisfied with the performance of this Bosch PS31 2A for any reason, he/she can return the tool within 30 days from the date of purchase with a receipt and receive a full refund – no questions asked.

Therefore, you can purchase this PS31 without having any doubt on your mind.

Pros and Cons of The Bosch PS31 2A 12V Max Cordless Drill/Driver

Pros & Cons

Pros

The parts are tightly set to the body that provides better stability of the tool.
It has a strong body and built up.
The battery effect is long-lasting.
The material potion is too of high quality.
The attachments are compelling enough.
The weight is too low is an impressive factor.

Cons

Not suitable for commercial use

Check Price

What Do Users Say on Bosch PS31 Cordless Drill Driver?

People post their reviews and rate products according to their positive and negative experiences with that product. If that is the case, you can trust Bosch PS31 2A more than many other drill driver tools.

Because this product has more than 2 thousand reviews on Amazon, and most of them are positive. It has 4.8 ratings on a scale of 5.

Many users have upgraded their existing drill driver with this product, and many switched to this product from a different brand. Users loved the compact, lightweight design, powerful high-performance motor, and long-lasting battery life.

Besides, the low price is always an additional benefit that most users love to have.

Frequently Asked Questions

Are Bosch Ps31 Cordless drills any good?

The Bosch PS31 2A is a reliable drill that comes with a decent amount of power and an ergonomic design. The package contains two lithium-ion batteries, which last for a long time, and you can charge a battery in just 30 minutes. After completing the charge, you can use them for a long time.

Bosch is a renowned multinational company, and the company is famous for its research and cutting-edge innovative products. As an electronic company, Bosch has earned a reputation many other companies only can dream of. Therefore, you can purchase Bosch cordless drills without any doubt in your mind. Moreover, they backed their products with a 1-year replacement warranty, 3-year service, and 30 days money-back guarantee.

Are the motors of Bosch PS31 2A 12V Max combo kit tools brushless?

No, the motor is not brushless, but the motor is powerful enough to perform a wide range of applications. This is a mid-range priced cordless drill driver, and tools with a brushless motor are expensive. So, if you are looking for a tool with a brushless motor, be prepared to spend extra bucks from your pocket.

But if you are an amateur or weekend DIY enthusiast and the applications you will perform primarily with household works; you do not need a brushless motor. Bosch PS31 comes with a motor that is powerful enough for light to mid-range drilling projects.

Can I drill through concrete with this drill?

Yes, you can but bear in mind that this drill is not designed to drill into concrete. In fact, if you are planning on working more with concrete, you must need a hammer drill. Because if you drill in concrete more often or do extensive work without a hammer drill, your drill will be in danger. Your drill will overheat, and as a result, the motor will stop working.

The Bosch PS31 may work fine on a plain concrete surface, and you can dig small holes with it. But if you need larger holes and more frequent use, we advise you not to use them and purchase a hammer drill.

What kind of warranty can I have with this 12v max drill driver kit?

This cordless drill driver is qualified for the FREE 3 Year Pro-Vantage Tool Protection Program by Bosch. If a customer registers in the ProVantage Program, he/she will receive 3-year tool protection (First-year replacement and year 2 & 3-year free tool repair) warranty. Moreover, a two-year battery replacement and a one-year standard warranty for the charger are available.

What type of case does this kit come with?

The product comes with a soft nylon zipper case with elastic and velcro fastening to hold the drill, extra battery, and the charger in place. The case has enough space to accommodate a few other small accessories as well.

Can I drill 2-inch 3/8 holes in a table with this drill?

Yes, you can. But you have to be patient while doing this. Drill slowly and carefully.

Can I drill a hole in a metal door with this drill?

Yes, the Bosch PS31 2A can drill a hole in a metal door with the correct speed and blade used.

Can Cordless drill get wet?

Never expose your cordless drill to rain or any kind of water source. If water goes into the cordless drill, that will increase the chance of electric shock. Keep your Bosch PS31 out of water.

Is this a drill or impact driver?

This is a compact drill driver, not an impact driver.

What are the speed settings of this tool?

The PS31 2A has 2 gears and RPM ratings of 0-350 and 0-1,300 PRM. The trigger is variable speed.

Conclusion

This a small and slim product, but it is powerful when it comes to screws. That means the Bosch PS31 – 2A is very good for contractors or consumers looking to do light to medium-duty works.

The Bosch PS31 2A cordless drill driver is 22% more compact, has 25% more max torque, and is 15% faster. It has fuel placed on the side of the tool, and you will easily monitor battery life. The first speed RPM ranges from 0 to 350. The second speed of RPM ranges from 0 to 1,300. The max torque of this drill is 265-inches-per-pounds. Bosch PS31 measures 7-inches in length and weighs only 1.8-pounds.

With this product, you will get two batteries with this package, two screwdriver bits, and a spacious contractor bag.

We’ve described what you can expect from the Bosch PS31-2A and how the product will be beneficial for you. Bosch has manufactured great tools for years and has not been disappointed with the Bosch PS31 – 2A.

This is the best cordless compact drill driver at a very affordable price. If you are searching for a drill driver for DIYs or even for professional reasons, we highly recommend Bosch PS31 2A 12V Max.

Bosch GSR12V 140FCB22 Flexiclick Drill Driver Review

March 23, 2021 By Muhibbullah Shiddique

Bosch GSR12V 140FCB22 Flexiclic 5 in 1 drill driver set has made your working journey easier. If you are a tradesman, you are familiar with carrying too many tools to be on the safer side. At work, you can not predict when you will need which tool.

Maybe you will need the right angle drill once a month, but you still carry that drill with you because you don’t want to be sloppy at your work. As a result, your tool bag gets filled with extra unnecessary tools.

Considering this problem, famous power tools manufacturer Bosch has an idea and decided to do something practical. The Bosch GSR12V 140FCB22 Flexiclick 5 in 1 comes with a single solution. With this Flexiclick 5-in-1, you do not have to carry various drills at your work.

The Bosch GSR12V 140FCB22 Max Flexiclick® 5-In-1 Drill/Driver System – Overview

The Bosch GSR12V 140 FCB22 Flexiclick is not entirely a unique idea, but professionals have to admit, it’s a very cool concept. It’s a drill that has interchangeable heads. So when you are drilling holes, you can change the drill head as you need.

Besides, if you have to get into a tight space, you can detach the head and attach the right angle drill head. Bosch GSR12V 140FCB22 calls the mounting system “One-Click interface.” Pretty cool!

What Includes In Bosch GSR12V 140FCB22 Flexiclick

Bosch GSR12V 140FCB22 12V Max Flexiclick® 5-In-1 Drill/Driver – 1
Keyless Chuck Attachment – 1
Locking Bit Holder Attachment – 1
Right Angle Attachment – 1
Offset Angle Attachment – 1
12V Max Lithium-Ion 2.0 Ah Batteries – 2
12V MaxCharger -2
Carrying Bag – 2

Bosch GSR12V 140FCB22 12V Max Flexiclick 5-in-1 Drill Driver System – Details Features

The Bosch GSR12V 140FCB22 Flexiclick 5 in 1 has four chucks and is built for professionals. The set has a straightforward twist-lock design that makes them effortless to attach and detach and lock securely in place. Because of these other chucks, Bosch is calling this model Flexiclick.

Bosch GSR12V 140FCB22 provides 4 chucks in addition to the built-in 1/4-inch magnetic hex chuck. It also comes with 12V max lithium-ion batteries.

Basic Tool

The Bosch Flexiclick 5 in 1 contains a magnetic 1/4″ hex drive and is just 5-1/5″ long. That makes it a compact, high-quality drill driver system. With 265 in-lbs of torque, this robust drill/driver delivers the best performance you can expect regarding the size.

The power tool has two-speed settings that have 0-400/0-1,300 RPMs for quick and precise jobs. The drill/driver is extremely lightweight, coming in at 1.8 lbs.

Here you can find vast categories of drill driver sets.

Design

The basic design idea of this drill driver system is that the tool has interchangeable chucks, and you can use one or two chucks to put one before another at a time. It starts with a magnetic bit holder for conventional driving.

The compact design delivers outstanding versatility. The trigger provides a variable speed and straightforward to control and sustain a specific rate. You can locate the forward and reverse where you can effortlessly control it with your thumb or other fingers and change directions.

Like other Bosch GSR12V 140FCB22 tools, you will find the device’s battery status gauge instead of on the battery. The drill driver comes with 1-20 torque settings with a drill setting.

The tool has a LED light, and that is relatively bright. The LED light is placed right under the drill head to brighten the work areas.

The LED does a great job illuminating the working spaces if there is a lack of light. One tiny problem is that you can see a shadow because of the LED placement.

As we told earlier, this drill driver 5 in 1 is a multi-head tool which means you can change the heads from one to another. Everything is metal, and the outer side is strong plastic which means this tool is durable and lasts a long time. When you attach a head-on, it fits perfectly.

Detaching the head is very easy; just turn the ring to the unlock position, and the head will be separated. You can now attach another head and lock it back into place easily. The drill driver comes with four various heads meaning you can complete almost any kind of project.

Moreover, you can set the offset and right angles at 16 positions without removing them.

5 Functions of Bosch GSR12V 140FCB22 12V Max Flexiclick Cordless Drill

Bosch named the FlexiClick a 5-In-1 Drill/Driver System, so we’ll describe each of the five functions.

1. LOCKING BIT HOLDER ATTACHMENT

The Bosch GSR12v 140fcb22 drill driver system’s first and most basic function is the locking bit holder attachment. You will find this locking bit holder attachment at the front of the drill body. Interestingly this holder won’t lock a bit in place; it rather depends on a magnetic hold.

Moreover, the magnetic bit holder provides the shortest head length. As a result, the drill works fine for quick and basic driving tasks. The locking bit holder attachment locks hex bits for high torque driving.

The bit holder works well, too, when you have to keep the head length as short as possible so that you can work in tighter spaces. This bit holder is also responsible for driving the hex drive shafts on the four attachment heads.

2. RIGHT ANGLE ATTACHMENT

The following kit is the right-angle attachment. The right-angle attachment is designed so that it can get into tight spaces where the drill itself won’t fit into. There are many various right-angle attachments available in the market that you can attach with any regular drill, but this one is undoubtedly the best one from our observation.

The integrated right-angle attachment is designed to tackle the full torque the drill can deliver. Another essential feature is that the right-angle attachment body doesn’t rotate freely as an add-on one does.

You can adjust the right-angle head on the Bosch GSR12V 140FCB22 max FlexiClick to 16 positions without removing it in 22.5-degree increments. So, you can position it to where it works best. The process is straightforward; just pull it outward, rotate, and lock it back into whichever detent you choose.

Moreover, any of the other three attachments will also attach to the right-angle head to increase versatility.

3. KEYLESS CHUCK ATTACHMENT

You will get a regular drill/driver keyless chuck attachment for typical drilling tasks. The chuck size is 3/8″, so it can tackle most light to medium-duty drilling tasks. The drill/driver keyless chuck attachment provides locked-in drilling for more challenging surfaces.

We noticed that the grooves in the sleeve of the keyless chuck are too deep, which offers a good grip on tightening it down on bits.

4. HEX CHUCK

The next one is a standard locking hex chuck for regular driving bits. This is the chuck you will find on most drivers and impact drivers. This is the head to use when you need a more secure hold on the driver than the basic magnetic one.

5. OFFSET ANGLE ATTACHMENT

The fifth and the last attachment and most probably the most versatile one is the offset head. This attachment is FlexiClick’s most remarkable feature and the one that makes it unique from most drill/drivers. Offset angle attachment offers precise screw driving.

If you are drilling or driving very close to an adjacent surface, this offset attachment is a lifesaver. In those situations, the offset angle attachment offers precise screw driving or drilling.

The offset head’s hex chuck goes as close as 7/16″ far from the adjacent area compared to 1-1/16″ for the drill’s body. So at 5/8″ closer, this scenario makes a significant difference while you are drilling or driving. You also can rotate the offset head to 16 positions without removing it—the same as you can with the right-angle head.

Other Features of the Bosch GSR12V 140FCB22 max drill driver system

The removable chuck feature is not everything that this drill driver system has. Bosch GSR 140FCB11 12v max Flexiclick 5-in-1 has a 2-speed motor to work with 2-speed settings. The motor is not brushless, but it delivers up to 265 in. lbs. of torque.

As you expect from any Professional-grade drill, there’s a chuck you can use to drill a pilot hole for driving or flip it over to lock it in drilling mode for getting the maximum torque.

The built LED light just under the chuck is very handy at lighting up your workspaces. Even though It’s not as productive as the ones surrounding the chuck, it still does a great job.

The Bosch Flexiclick 5-in-1 features an LED battery level indicator located on the tool’s left side when you hold it. The indicator lights up just when you pull the trigger.

Thus it’s simple to watch the remaining battery charge. This is a handy feature because there’s no indicator provided on Bosch 12V battery packs.

Bosch Flexiclick Drill-Driver Ergonomics

Bosch’s handle ergonomics are operated by the stick pack design of their batteries. This makes the handle wider, they did a decent job with what they should work with, and the handle fits in hand perfectly.

The balance should not be an issue with a lightweight tool like this. However, depending on the chuck you are using, you can notice a shift forward.

Performance

Many people do not like multi-head tools because the general perception is that they do every work just okay and don’t really excel. But the Bosch GSR12V 140FCB22 Flexiclick 5-in-1 is different. No matter what head you attach to the tool, it excels. The drill does a fantastic job, and when you change to the correct angle drill, there is no noticeable difference.

That makes it an excellent tool and a multi-head tool that you can invest in.

The compact, high-quality drill driver set performs as you would expect from the Bosch GSR12V 140FCB22 system. The drill is smooth, straightforward to feather the trigger, and powerful enough for most projects.

Besides, the package comes with at least one pair of lithium-ion batteries; Even if you switch to the correct angle drill, you won’t notice a loss of power or ergonomic balance. There isn’t a delay in drilling or driving.

If you want to use the Bosch GSR12V 140FCB22 with the Hex attachment head, you won’t notice it’s a multi-head tool. It feels and performs just like a screw gun.

Even the offset head works smoothly. You won’t feel any loss of power or feel of the tool. This drill driver is not for those heavy-duty applications; instead, it’s for precision applications where getting the job done at the right time matters more.

You can set the right-angle and offset chuck to 16 positions without removing them.

This tool is a top performer for woodworking, not masonry.

Pros

Bosch GSR12V 140FCB22 Flexiclick® 5-in-1 design delivers outstanding versatility in a compact, high-quality drill/driver.
Keyless chuck attachment brings locked-in drilling for complex materials.
Locking bit holder attachment locks hex bits for high-torque driving.
Right angle attachment designed for tight and challenging workspaces; works fine with other three adapters and rotates to 16 positions without removing from the tool.
Offset angle attachment offers precise screw-driving very close to edges; rotates to 16 positions without removing from the tool.
The magnetic bit holder provides the minimum head length for basic driving without an attachment.
One-Click interface supplies a secure, simple fit with included attachments.
The compact design weighs only 1.4 Lbs. but provides 265 In.-Lbs. of torque
LED light brightens dark work areas effectively, and the afterglow function keeps the light on for 10 seconds after you turn off the drill.
Lithium-ion battery, voltage 12-volt.

Cons

Not suitable for heavy-duty drilling applications.
The design needs a bit of improvement.

Buy Now on Amazon

Bosch GSR12v 140FCB22 12V Max Final Thoughts

Considering the price, Bosch GSR12V 140FCB22 Flexiclick 5-in-1 is most probably the priciest 12V drill. But if you think of the versatility, this is a very wise choice.

Flexiclick’s functions and mid-range performance in the 12V line make it a unique option for woodworkers and cabinetmakers. Besides, Remodelers, electricians, HVAC, and DIYers will want to consider this tool as well.

Moreover, the compact and lightweight drill/driver design delivers outstanding versatility.

This is a powerful tool for tradespeople who want to have a handy tool in many situations.

Makita Power Tools Company Review By Alldrillsets.com

March 23, 2021 By Muhibbullah Shiddique

Makita power tools company is well-known in the power tools industry. Established in 1915, the company has been firmly putting out excellent products and constantly innovating new products to fight with some giants power tools manufacturers like Bosch, DeWALT, and, of course, Milwaukee.

Every mechanic, handyperson, woodworker, or even DIYer has its go-to brand. However, the latest trends showing a slight shift in Makita’s favour and of course, for a good reason.

There are popular theories behind the rise of Makita. Makita is famous for producing lightweight, highly efficient products. Makita tools are user-friendly and are ideal for professionals and beginners.

Makita tools like the impact wrench, cordless reciprocal saw are famous among the contractors for their user-friendly and lightweight design. However, Makita’s trump card is one of the essential power tool components—the Makita 18V battery. These 18V lithium-ion batteries are famous for durability and constantly outperform batteries from giant companies like Milwaukee and DeWalt.

History of Makita Power Tools

Makita Corporation was established in 1915 as an electric motor sales and repair company. Makita is an innovative company manufacturing powerful and efficient products at 10 operating plants running in 8 countries.

The excellent quality and durability of Makita power tools are handled by the company’s strong R&D capabilities and have earned the faith of professionals and DIYers worldwide. Every day, on worksites across the world, Makita offers the performance and durability that professional users and DIYers demand.

Makita tools have less vibration and comfortable to use.

In 1958, Makita launched a portable electrical planer in Japan and started manufacturing tools the following year. In February 2005, Makita introduced their first lithium-ion battery tool, the TD130D. And after that various tools such as lawnmowers, LXT system, string trimmers, and circular saw are gaining many users’ trust.

Makita Power Tools

Cordless tools

Makita offers many tools in this section. They manufacture cordless screwdrivers, cordless impact wrenches, cordless reciprocal saw, cordless rotary hammers drills, and cordless jigsaws. The company also offers a wide range of other tools such as battery saws, cordless angle grinders, cordless multi-tool, cordless planers, cordless metal shears, battery-powered screwdrivers, and cordless slot mills.

Makita Power tools

In the field of power tools, Makita offers some classic tools like drilling and stemming hammers, drills, planers, saws, and cutting & angle grinders. Besides, gardening equipment (electric lawnmowers, high-pressure cleaners, blowers) and measuring tools (rangefinders, rotating lasers) are also top-rated among users.

Petrol equipment

Makita power tools design and develops cutters, power generators, chainsaws, scythes, lawnmowers, and blowers, and some other petrol power equipment in this sector.

Cordless Makita power tool batteries

Makita batteries are prevalent among users. Their 18V lithium-ion battery is far better than their rival companies. Professionals prefer Makita’s battery to other giant companies like DeWALT, Milwaukee, Bostch, etc. Makita started manufacturing 18V lithium-ion cordless tools in 2005.

Accessories

Makita power tools also produce many accessories to support their power tools, like batteries and chargers for cordless tools. They manufacture blades and tables for sewing tools. Moreover, Makita also manufactures carrying cases to carry their tools to their job site quickly.

Driving Force of Makita Power Tools

Innovation

Constant strive for innovating new technology and introducing them to their products are the main driving force of Makita power tools. The company has introduced some vital technological improvements over the years, such as safety solutions like AVT, dust extraction, and of course, the Lithium-Ion battery and chargers technology; Makita stays at the forefront of new ideas.

Makita has their dedicated research and development centre in Japan, where dedicated engineers and researchers work day and night to constantly improve their products in all aspects, from energy consumption to fast charging to ergonomic design and function for the best user experience.

Manufacturing Ability

Makita power tools manufacture its power equipment in plants across the globe, from its main office in Japan.

Makita’s acquired Dolmar in 1991 and also established themselves as one of the strongest contenders in the Outdoor Power Equipment market. They have a plant in Germany that is constantly delivering power tools worldwide to the highest quality.

The motto of their manufacturing process is ‘powerful motor.’ Without a good motor, no power tool can satisfy its user. For the users’ sake, Makita makes every effort to make sure their motors are of the best quality.

The company brings the absolute best raw materials and components for building the most powerful and efficient motors you can imagine.

Quality of Makita Power Tools

Makita power tool uses premium-grade steel to manufacture armature shafts and gears. Only the highest grade steel is used to build those products to ensure the highest product quality of Makita power tools.

Moreover, the company uses high-grade magnetic copper wire into each one of its tools to confirm superior current flow whilst withstanding maximum temperatures.

The quality control team of Makita tests every tool before leaving the manufacturing plants. No tool is left untested; Makita performs 19 extensive tests on the motor only!

Makita understands a power tool is like an investment, and the relation between company and buyer is a long-lasting relationship. Makita respects that relationship and wants to maintain it at any cost.

Frequently Asked Questions on Makita Power Tool Company

Is the Makita power tool made in China?

Makita Corporation is a Japanese company of power tools. The company was established in 1915 and now has become a global brand operating in more than 40 countries worldwide. Makita power tool has manufacturing factories in Brazil, China, Japan, Mexico, Romania, the United Kingdom, Germany, Dubai, Thailand, and the United States.

Are Makita Power Tools Made in the USA?

Since 1985 Makita established a plant in the USA, outside of Atlanta in Buford, Georgia. Since then, the company has been manufacturing products in the USA. The company has many other plants in various countries to manufacture Makita power tools.

Is Makita better than DeWALT?

DeWALT makes the best power tools in terms of production, durability, and torque. On the other hand, Makita makes the best power tools with battery performance and a comfortable design. It is tough to call one company a winner.

Conclusion

Makita power tools company has been developing and manufacturing products with high battery performance and durability with an easy-to-use design. Their products will give you comfort, power, and battery performance will astonish you.

They are not a giant in the power tools industry, but they are in a race with other giants, and that is an excellent competition for the users as they are getting top-class products.

We hope this article helped you know about the company Makita power tools manufacturer and we believe the can company deserves your trust, and you should try their power tools before falling for another brand or product.

Power Drills

How To Drill Out A Lock

Checklist

Can I Drill Out A Lock?

You Should NOT

Precautions Before You Drill Out A Lock

Pick Up The Lock

Bump The Lock

Bring a Replacement Lock

Get The Owner’s Permission

What Will You Need To Drill Out A Lock

How to Drill Out A Lock

1. Hammer a Point For Guidance

2. Start Drilling

3. Apply Steady Pressure

4. Change The Bit

5. Insert The Screwdriver

6. Destroy The Lock Mechanism

How To Drill Out a Lock When a Key In It

1. Choose The Right Drill Bit

2. Turn The Lock Mechanism

3. Buy a Replacement Cylinder and New Key

Is it Possible to Drill Out a Master Lock?

Can a Lock Drilling Template Make The Drilling Easier?

Tips on Drilling Locks

More Helpful Tips On Tools

Makita Power tools

Makita products

Dewalt Drill Driver

Cordless Impact Driver

Conclusion

How To Drill A Hole In Plastic

1. Support the plastic

2. Hold The Plastic Down Using Clamps.

3. Use A Pen And Masking Tape To Mark The Center Of The Hole

4. Use An HSS Drill That Has Been Used Before And Therefore Slightly Dull

5. Hold Your 90 Degrees (Perpendicular) To The Plastic

6. How To Drill Near The Edge Of A Plastic Sheet?

7. How To Drill Deep Holes Into A Plastic

Useful Tools To Drill A Hole In Plastic

GOXAWEE Rotary Tool Kit with MultiPro Keyless Chuck and Flex Shaft

DEWALT Corded Drill, 8.0-Amp, 3/8-Inch

Dewalt Dwa1184 14 piece Set Black Oxide Coated Hss Twist Drill Bit Set.

Professional Titanium Twist Drill Bit Set

Conclusion

How to Use A Drill For Screws

The Bit

The drill bit speed

Select the right action setting

Torque settings

Why my driver bit doesn’t stay in the head of the screw!

Use low speed for your drill.

Suggested Tools

Dewalt DCF887D2 20V MAX XR Impact Driver

PORTER-CABLE PCCK647LB Impact Driver

Makita XDT131 18V LXT Cordless Impact Driver Kit

Dewalt DCF887B 20V MAX XR Impact Driver

Milwaukee M12 Fuel 1/4 inch Impact Driver Kit

BLACK+DECKER BDCI20C Impact Driver Kit

DEWALT DCF885C1 Impact Driver Kit

DEWALT DW1720 Brad Point Drill Bit

Steelex D1034 Deluxe Brad Point Bit

Dewalt Brad Point Wood Drill Bits

Dremel 631 Brad Point Bits

Fisch FSF-364757 Brad Point Drill Bit Set

Fisch Brad Point Drill Bits

Fisch – FSF-134893 FSF-328094 Brad Point Drill Bits

Fulton 12″ Long Brad Point Bit Set

Bosch Brad Point Drill Bits Set

WoodRiver Brad Point Drill Bit Index Set

Auger Drill Bit Garden Plant Tool

Eagle Tool US EA75036 Installer Drill Bit

IRWIN Weldtec Ship Auger Bit

SuperThinker Auger Drill Bit for Planting

Makita D-35900 Ship Auger Bit

DEWALT DW1687 Ship Auger Drill Bit

Woodrow 09709 Ultra Smooth Auger Bit

Conclusion

What Is A Hammer Drill And How It Works:

What Is A Hammer Drill?